Manual

General Maintenance
125
Model 10054 Rev 3/02
B. Oil And Filter Change
1. Operate the engine until warm (approximately 5 minutes).
2. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, move neutral lock lever to NEUTRAL LOCK
position, engage the parking brake switch and shut off the engine.
3. Place receptacle under engine oil pan drain.
4. Remove drain plug from engine oil pan.
5. Allow oil to drain completely into a receptacle. Transfer the oil to a
container with a cover and label the container as used oil. Dispose
of the used oil at an approved recycling facility.
6. Unlock and open the left engine access door. Remove oil filter
(Figure 82). A strap or chain filter wrench may be required.
Figure 82
7. Clean filter sealing surface. Make sure the o-ring seal from the filter
comes off the sealing surface.
50
250
OS0830
OH2670
OH2710
0724650
390
3102
OG0031
Engine Oil
Filter
General Maintenance
125
Model 10054 Rev 3/02
B. Oil And Filter Change
1. Operate the engine until warm (approximately 5 minutes).
2. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, move neutral lock lever to NEUTRAL LOCK
position, engage the parking brake switch and shut off the engine.
3. Place receptacle under engine oil pan drain.
4. Remove drain plug from engine oil pan.
5. Allow oil to drain completely into a receptacle. Transfer the oil to a
container with a cover and label the container as used oil. Dispose
of the used oil at an approved recycling facility.
6. Unlock and open the left engine access door. Remove oil filter
(Figure 82). A strap or chain filter wrench may be required.
Figure 82
7. Clean filter sealing surface. Make sure the o-ring seal from the filter
comes off the sealing surface.
50
250
OS0830
OH2670
OH2710
0724650
390
3102
OG0031
Engine Oil
Filter