Manual

General Maintenance
119
Model 10054 Rev 3/02
4. If replacing safety element at this time (Figure 75), remove wing nut
and carefully slide safety element out. Always discard this element
and replace with a new element and secure with wing nut.
5. Install the new primary element and secure with wing nut.
6. Position canister cover in place and secure with cover wing nut.
Figure 75
C. Air Intake System-Inspection
Inspect the intake piping for cracked hoses, loose clamps or punctures
which can allow dirt or debris to enter the combustion chamber. If dirt or
debris are allowed to enter the combustion chamber, they can severely
damage the engine. If necessary, tighten or replace parts to prevent air
intake system leakage.
OF0120
Wing Nut
Safety Element
1000
OT0880
OH2690
General Maintenance
119
Model 10054 Rev 3/02
4. If replacing safety element at this time (Figure 75), remove wing nut
and carefully slide safety element out. Always discard this element
and replace with a new element and secure with wing nut.
5. Install the new primary element and secure with wing nut.
6. Position canister cover in place and secure with cover wing nut.
Figure 75
C. Air Intake System-Inspection
Inspect the intake piping for cracked hoses, loose clamps or punctures
which can allow dirt or debris to enter the combustion chamber. If dirt or
debris are allowed to enter the combustion chamber, they can severely
damage the engine. If necessary, tighten or replace parts to prevent air
intake system leakage.
OF0120
Wing Nut
Safety Element
1000
OT0880
OH2690