Installation Guide

REV.3/19-05 Page 15 of 16
QUICK SET-UP GUIDE
FOR SKYTECH 3324R PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SETUP and OPERATE the SKYTECH programmable
transmitter. For detailed instructions for each feature and function, see OWNER”S MANUAL.
INITIAL SET-UP SET FUNCTIONS USING BUTTONS ON FRONT OF TRANSMITTER
1. Remove battery cover.
2. Insert 2AAA batteries.
3. Press SETTING button.
4. Replace battery cover.
All further programming
to be made on front of
transmitter.
OPERATION – Press MODE button on TRANSMITTER to change operating functions.
1. ON indicates the system is on, either manually or
thermostatically.
2. OFF indicates the entire system is turned off.
3. THERMO indicates the system will automatically
cycle ON/OFF, depending on programmed SET
temperature.
4. PROGRAM indicates the system is operating with
PROGRAMME settings.
OTHER OPERATIONS – Press corresponding buttons on TRANSMITTER to activate functions.
1. TIME OF DAY
– Press TIMER/TIME button for less than ONE second.
2. TIMER OPERATION
– Press and hold TIMER/TIME button for two
seconds.
3. SET
COUNTDOWN TIME by pressing UP or DOWN buttons.
4. FAN OPERATION
– Press FAN button.
5. HI/LO FLAME
levels depending on type of electronic valve on
appliance.
6. NOTE:
Press SET button to stop LCD Digits from flashing.
1. SCALE (DEGREE F/ DEGREE C)
–
Press UP
or DOWN button. Press
SET
button.
2. DAY OF WEEK
– Press AHEAD or
BACK
button. Press SET button.
3. HOUR OF DAY
– Press UP or
DOWN
button. Press SET button.
NOTE: AM or PM on LCD.
4. MIN. OF DAY
– Press UP or DOWN
button. Press SET
button.
5. FLAME CONTROL
- Press UP or
DOWN
button. Press SET button.
NOTE
: Each SETTING will flash,
separately, on LCD screen. After each
SETTING you
must push
SET/RETURN button. You may not
have to change factory setting, but
you must push SET/RETURN button.
Setting
Button
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
FAN
FLAME
1
SU
NITE
PROGRAM
ON
THERMOOFF
1
2
3
4
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
FAN
FLAME
TIME
SET
WE
HOLD
FLAME
OVERRIDE
AM
1
2
3
4
UP
DOWN
MODE
TIMER
TIME
SET
PROG
AHEAD
BACK
FAN
FLAME
5