User Manual

5
Sound Activated Remote Transmitter
TOP
A – ON/OFF & MICROPHONE DIAL:
o Powers transmitter ON/OFF and illuminates power light
o Adjusts microphone sensitivity from 100 db to 80 db. Midrange position
starting point. Clockwise will increase microphone sensitivity (quieter sound
will activate unit). Transmitter activated by loudness of ANY sound.
o Must be set to OFF when not in use to conserve battery life.
B – MICROPHONE
o To ensure optimum performance keep microphone clear of obstructions such
as clothing.
C – POWER LIGHT (Green):
o Green LED flashes at a rate of 1 second on and 1 second off when
transmitter is powered on and at a rate of 0.5 seconds on and 0.5 seconds off
when transmitter battery is low (active only when transmitter is turned on).
D – ARMED LIGHT (Red):
o Manual mode: Illuminates for 2 seconds when reset button pressed and unit
sends signal to receiver(s)
o Auto mode: Flashes at a rate of 1 second on and 1 second off when set to
auto mode and reset button is pushed (unit armed). Illuminates for 2
seconds when sound command registers and unit sends release signal to
receiver(s).
Back
E – BELT/POCKET CLIP:
F – BATTERY COMPARTMENT COVER:
o Remove to replace batteries
A
C
B
D
E
F