User Manual

Shooting targets with 2 traps

(One trap connected to receiver programmed as A and the other trap

connected to receiver programmed as B)

Turn on and ARM receivers connected to traps

Step 1 Turn on unit and set sensitivity to mid

point

Step 2 Press T1 and set the desired time delay

(in seconds) for the first trap

Step 3 Press #T and set to 1 or 2 for number of

traps launching targets

Step 4 Press SEQ and set sequence of traps

If #T set to 1

A-B (receiver A will activate)

B-A (receiver B will activate)

Rnd (A or B will activate)

If #T set to 2

A-B (receiver A, then receiver B will

activate)

B-A (receiver B, then receiver A will

activate)

A&B (receivers A&B will activate

simultaneously)

Rnd (A-B, B-A or A&B will activate)

Step 5 Press T2 and set the desired time delay between the first trap and the second trap.

(If #T set to 1 or SEQ set to A&B, this setting disabled)

Step 6 Press ARM and set to Manual or Auto release

Step 7 Clip transmitter to front pants pocket, shirt pocket, or belt.

Step 8 Press RESET button

If ARM set to Manual, Press RESET button to send release signal to receiver.

If ARM set to Auto, Press RESET button to arm unit and now a sound will activate unit

and send release signal to receiver. Press RESET button or any front button to

disarm transmitter.