User Manual

VIII. Operational Examples

Shooting targets with a single trap

(Receiver programmed as A and connected to trap)

Turn on and ARM receiver connected to trap

Step 1 Turn on unit and set microphone

sensitivity to mid point

Step 2 Press T1 to set the desired time delay

(in seconds) for the first trap

Step 3 Press #T and set to 1

Step 4 Press SEQ and set to A-B to launch

targets from a trap connected to a receiver

programmed as A

Step 5 T2 has no function and will not

illuminate

Step 6 Press ARM to select Manual or Auto

release.

Step 7 Clip transmitter to front pants pocket,

shirt pocket, or belt.

Step 8 Press RESET button

If ARM set to Manual, Press RESET button to send release signal to receiver.

If ARM set to Auto, Press RESET button to arm unit and now a sound will activate unit

and send release signal to receiver. Press RESET button or any front button to

disarm transmitter.