User Manual

9
- If foot pedal is still needed, attach Foot Pedal Connector (see contents part E) to
remaining foot pedal release cable using the same procedure. The receiver can then be
unplugged and the foot pedal cable plugged back in so foot pedal can be used.
- Repeat procedures for other receivers and traps
Mounting receiver(s)
- Receiver(s) should be mounted above ground level and close to the 12V power source
with the receiver antenna pointed straight up.
- An ideal location is on the top of the 12V battery; use the included Velcro mounting
pads (contents part F).
- Do not mount the receiver to the trap machine, as vibration may damage internal
components.
To foot pedal