User's Manual

Objective
Define basic construction, touch-screen LCD & button layout, and operational parameters for a wireless
transmitter to operate the COPRECI “ReMotion” ignition control module & optional auxiliary module.
Basic Construction
• Transmitter body should be the same construction as current production model ReMotion TX.
• Touch-Screen LCD and three push buttons will allow input from users.
• LCD screen will provide system status & input feedback to user.
• Backlight will illuminate LCD screen for 5 seconds after any user input – the 1
st
touch of the LCD
screen will only illuminate the backlight (will not respond to associated zone function).
• Powered via four AAA sized batteries (6V nominal) with LOW BATTERY INDICATOR (5.0V).
Touch-Screen LCD and Button Layout (not-to-scale)
MODE Zone
SET TEMP Zone
ROOM TEMP Zone
LIGHT Zone
FLAME Zone
TIME/PROG Zone
AUX Zone
FAN Zone
DOWN Button
MODE/SET Button
UP Button
MODE/SET