Specifications

MANUAL OFF command the next time the transmitter reads & updates the room
temperature (2-minute update interval).
Program Operation
• Press the TIME/PROG Zone to activate or deactivate Program Operation. Pressing the
MODE Zone or the MODE/SET Button will also deactivate Program Operation. When
Program Operation is deactivated, the transmitter will return to MANUAL OFF Mode.
• Program Operation will cycle fireplace ignition ON and OFF based on time settings (2
weekend periods and 2 weekday periods) and thermostat settings.
• To enter Program Setup, press and hold the TIME/PROG Zone for 5 seconds.
• Press the MODE/SET Button or wait for 15 seconds to advance to each subsequent
program setting.
• Program setting sequence and factory default settings:
o Weekend Program 1
▪ ON: 6:00am
▪ OFF: 10:00am
▪ SET TEMP: 68-Deg. F.
o Weekend Program 2
▪ ON: 5:00pm
▪ OFF: 10:00pm
▪ SET TEMP: 68-Deg. F.
o Weekday Program 1
▪ ON: 5:00am
▪ OFF: 9:00am
▪ SET TEMP: 68-Deg. F.
o Weekday Program 2
▪ ON: 4:00pm
▪ OFF: 10:00pm
▪ SET TEMP: 68-Deg. F.
• Program Setup LCD Displays:
o MODE Zone: Current mode is displayed
o ROOM TEMP Zone: Measured temperature is displayed
o SET TEMP Zone: Set temperature for program segment being adjusted is
displayed and will flash if SET TEMP is selected for adjustment.
o LIGHT Zone: LIGHT and light setting level is displayed
o FAN Zone: If MODE is in an ON state, FAN and fan setting level is displayed.
If MODE is in an OFF state, FAN zone will be blank.
o TIME/PROG Zone: PROGRAM, currently selected segment icons (either S&S
Icons for weekend segment or MTWTF Icons for week day segment, and either
P1-ON, P1-OFF, P2-ON or P2-OFF), and currently selected program segment
ON/OFF time setting is displayed and will flash if segment time setting is
selected for adjustment.
o AUX Zone: AUX and AUX setting is displayed
o FLAME Zone: If MODE is in an ON state, Flame-A and Flame-B Icons, and
Flame setting levels are displayed. If MODE is in an OFF state, FLAME zone
will be blank.
• Program OFF LCD Displays:
o MODE Zone: OFF
o ROOM TEMP Zone: Measured temperature is displayed
o SET TEMP Zone: Blank