Specifications

ManualsBrandsSkytech II ManualsElectronicsRemote control transmitter

FUNCTIONAL SPECIFICATION

VCS-ECOTSS01-1

EcoFlow Touch-Screen Transmitter

Revision History

Rev. 0: Draft Release. M.R. 12/11/2012.

Rev. 1: Clarified transmission delay when cycling to THERMOSTAT mode. M. Rogers 12/12/2012.

Rev. 2: Modified transmission delay to include all modes instead of THERMOSTAT mode only. M.

Rogers 12/13/2012.

Rev. 3: Changed transmission delay from 3-seconds to 2-seconds. M. Rogers 12/12/2012

Rev. 4: Changed transmission frequency from 433.92MHz to 303.0MHz. M.R. 12/17/2012.

Rev. 5: Changed reaction to 1

touch of LCD screen (will only illuminate backlight – no reaction to

associated Zone function). M.R. 12/21/2012.

Rev. 6: Changed reaction to 1

press of push-buttons (will only illuminate backlight – no reaction to

associated button function). M.R. 2/7/2013.

Rev. 7: Changed Room Temperature Limit feature to operate in ALL modes of operation (including OFF

modes). M.R. 3/21/2014.

Rev. 8: Added LCD display flashing sequence during Main Burner ON and Cont. Pilot ignition sequences.

Reference SKCN16-019. M.R. 10/19/2016

Rev. 9: Added “1” Suffix to model number per SKYCN17-006. M. Rogers 5/19/2017.

Rev. 10: Clarified Program Setup sequence and factory presets & removed reference to model 5301P,

corrected FLAME Zone LCD displays for ON States to include FLAME-B icon and setting. M. Rogers

7/17/2019.

Summary of content (10 pages)

PAGE 1
FUNCTIONAL SPECIFICATION VCS-ECOTSS01-1 EcoFlow Touch-Screen Transmitter Revision History Rev. 0: Draft Release. M.R. 12/11/2012. Rev. 1: Clarified transmission delay when cycling to THERMOSTAT mode. M. Rogers 12/12/2012. Rev. 2: Modified transmission delay to include all modes instead of THERMOSTAT mode only. M. Rogers 12/13/2012. Rev. 3: Changed transmission delay from 3-seconds to 2-seconds. M. Rogers 12/12/2012 Rev. 4: Changed transmission frequency from 433.92MHz to 303.0MHz. M.R. 12/17/2012. Rev.
PAGE 2
Objective Define basic construction, touch-screen LCD & button layout, and operational parameters for a wireless transmitter to operate the Copreci Valve IPI control module. Basic Construction • Transmitter body should be the same construction as model series AF-4000TSS##. • Touch-Screen LCD and three push buttons will allow input from users - the 1st touch of the LCD screen or press of a push button will only illuminate the backlight (will not respond to associated function).
PAGE 3
Functional Description Note: All function adjustments will be automatically accepted 15-seconds after pressing a given touch zone or button. The user may press the MODE/SET button to immediately accept the adjustment manually. Day and Time Display • The current day of week and time of day will be continuously displayed in the TIME/PROG Zone (except during Setup operations).
PAGE 4
o o o o o o SET TEMP Zone: Blank LIGHT Zone: LIGHT and light setting level is displayed FAN Zone: Blank TIME/PROG Zone: Current day indicator and current time is displayed AUX Zone: AUX and AUX setting is displayed FLAME Zone: Blank MANUAL ON Mode: • Transmits flame ON command • LCD Displays: o MODE Zone: ▪ ON will flash (~0.5 seconds on & ~0.5 seconds off) for 15-seconds, then ON will be displayed continuously.
PAGE 5
• • automatic flame adjustment will resume. Automatic flame adjustment will also resume if the operational mode is cycled out of, then back into THERMOSTAT mode or if the SET temperature is changed.
PAGE 6
MANUAL OFF command the next time the transmitter reads & updates the room temperature (2-minute update interval). Program Operation • Press the TIME/PROG Zone to activate or deactivate Program Operation. Pressing the MODE Zone or the MODE/SET Button will also deactivate Program Operation. When Program Operation is deactivated, the transmitter will return to MANUAL OFF Mode.
PAGE 7
o o o • LIGHT Zone: LIGHT and light setting level is displayed FAN Zone: Blank TIME/PROG Zone: Current day indicator, current time, and Program status (P1OFF or P2-OFF) is displayed o AUX Zone: AUX and AUX setting is displayed o FLAME Zone: Blank Program ON LCD Displays: o THERMO ON: ▪ THERMO and ON will flash (~0.5 seconds on & ~0.5 seconds off) for 15-seconds, then THERMO & ON will be displayed continuously. o THERMO OFF: THERMO and OFF is displayed.
PAGE 8
• LCD Display: When setting the Flame-A height, the Flame-A icon, and Flame-A setting number will flash in the FLAME Zone. Flame-B (or Rear) Adjustment • Transmits a flame height setting command to the control module to adjust the Flame-B height. • Available settings are 0 (off) – 3 with a factory default of 3. If the user changes the Flame-B setting during operation, the control will remember and use the adjusted setting on subsequent manual ON cycles (Flame-B setting memory).
PAGE 9
display in MODE Zone) or the FAN Icon and ON (ON display in MODE Zone) will flash 3-times (0.5-seconds OFF, 0.5-seconds ON) to indicate the change has been made. Light Adjustment • Transmits a light setting command to the control module to adjust the light output level. • Available settings are 0 (off) – 6 with a factory default of 0 (off).
PAGE 10
Continuous Pilot Operation • To activate or deactivate the Continuous Pilot Feature, press and hold the MODE/SET and UP Buttons simultaneously for 5 seconds. • LCD Display: When activated, CONT. PILOT will flash for 15-seconds, then CONT. PILOT be displayed continuously in the MODE Zone. Child-Lock Operation • Child-Lock operation prevents any user input to the transmitter. No mode of operation or feature may be adjusted when Child-Lock is activated. All automatic functions (thermostat, program, etc.