User's Manual

Objective
Define basic construction, touch-screen LCD & button layout, and operational parameters for a wireless
transmitter to operate the Copreci Valve IPI control module.
Basic Construction
• Transmitter body should be the same construction as model series AF-4000TSS##.
• Touch-Screen LCD and three push buttons will allow input from users - the 1
st
touch of the LCD
screen or press of a push button will only illuminate the backlight (will not respond to associated
function).
• LCD screen will provide system status & input feedback to user.
• Backlight will illuminate LCD screen for 5 seconds after any user input.
• Powered via four AAA sized batteries (6V nominal) with LOW BATTERY INDICATOR (5.0V).
• Transmission Frequency: 303.8MHz, certified per FCC Part 15B/ANSI C63.4 and IC RSS-210.
Touch-Screen LCD and Button Layout (not-to-scale)
MODE Zone
SET TEMP Zone
ROOM TEMP Zone
LIGHT Zone
FLAME Zone
TIME/PROG Zone
AUX Zone
FAN Zone
DOWN Button
MODE/SET Button
UP Button
MODE/SET