User's Manual

LCD
1. ON / THERMO / OFF
Indicates current mode.
2. ROOM °F OR °C
Indicates current room temperature.
3. LIGHT
Indicates light/valve in operation.
4. FAN
Indicates Fan/valve in operation.
5. MAIN FLAME
Indicates Main burner/valve in operation.
6. REAR FLAME
Indicates Rear burner/valve in operation.
7. SET °F OR °C
Appears the desired temperature to indicate setting room temperature during the time of setting in the
thermo operation.
8. Battery icon
Indicates the battery is low or not.
9. Continuous Pilot
Indicates continuous pilot enable/disable.
10. TIMER / TIME
Appears the time and the countdown timer.
11. Program Function
Indicates program is enable or not in own period time.
MANUAL FUNCTION
Initial Setup
pressing the FLAME REAR and PROG/TIME buttons simultaneously for 5 seconds. this will into the initial
setup mode. Each function scale setting is changed by “UP” or “DOWN” key.
Setting of C/F conversion:
C/F conversion: Use UP or DOWN key to choose Celsius or Fahrenheit, Press "SET" button to continue to
gas type setup.
Gas Type Conversion:
NG/LP conversion: Use UP of DOWN key to choose Natural Gas or Liquid Propane, Press "SET" button to