User's Manual

ManualsBrandsSkytech II ManualsElectronicsRemote Control Transmitter

AF-4000CFMHH Operation description

This remote control SYSTEM offers the user a battery-operated remote

control that operates most millivolt gas valves used in some heater rated gas

logs, gas fireplaces and other gas heating appliances.

The transmitter operates on (2) 1.5V AAA batteries.

It is recommended that ALKALINE batteries always be used for longer

battery life and maximum operational performance.

Before using the transmitter， install the (2) AAA transmitter batteries into the

battery compartment. (Use caution that batteries are installed in the proper

direction)

KEY SETINGS

MODE

Changes unit to ON / Thermo / OFF mode position.

UP / DOWN

Changes temperature, time(r) and other functions’

value.

FAN / MAIN FLAME/REAR FLAME / TIMER / LIGHT

Changes each function by UP/DOWN key.

SET

Sets temperature, time(r) and other functions.

PROG TIMER

Set / Activate Program Mode.

Summary of content (4 pages)

PAGE 1
AF-4000CFMHH Operation description This remote control SYSTEM offers the user a battery-operated remote control that operates most millivolt gas valves used in some heater rated gas logs, gas fireplaces and other gas heating appliances. The transmitter operates on (2) 1.5V AAA batteries. It is recommended that ALKALINE batteries always be used for longer battery life and maximum operational performance. Before using the transmitter， install the (2) AAA transmitter batteries into the battery compartment.
PAGE 2
LCD 1. ON / THERMO / OFF Indicates current mode. 2. ROOM °F OR °C Indicates current room temperature. 3. LIGHT Indicates light/valve in operation. 4. FAN Indicates Fan/valve in operation. 5. MAIN FLAME Indicates Main burner/valve in operation. 6. REAR FLAME Indicates Rear burner/valve in operation. 7. SET °F OR °C Appears the desired temperature to indicate setting room temperature during the time of setting in the thermo operation. 8. Battery icon Indicates the battery is low or not. 9.
PAGE 3
continue to clock set up. Clock Setup: Use UP or DOWN key to set HOUR, then press SET to enter “Minute” setting. Use UP or DOWN key to set “Minute”, and then press SET to enter AM/PM setting. Use UP or DOWN key to set AM/PM, the press SET to enter day of week setting. Use UP of DOWN key to select the day of the week. Mode To operate the system in the manual “MODE” does the following. ON OPERATION Press the “MODE” key into the ON mode. The appliance flame and fan will come on.
PAGE 4
THERMO ON situation During this mode the screen will display the set flame/valve and fan/value at the same time enable the functions setting. THERMO OFF situation During the situation the functions, FAN / FLAME / TIMER, will be shut down exception of LIGHT function NOTE: (*) The highest SET temperature is 99° Fahrenheit (32° Celsius) and the lowest temperature is (45° Fahrenheit (6° Celsius) FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.