User's Manual

ManualsBrandsSkytech II ManualsElectronicsGas Fireplace Remote Control Transmitter

AF-4000TRHH Operation description

Modified by Javy 2008/04/11

This remote control SYSTEM offers the user a battery-operated

remote control that operates most millivolt gas valves used in

some heater rated gas logs, gas fireplaces and other gas heating

appliances.

The transmitter operates on (2) 1.5V AAA batteries.

It is recommended that ALKALINE batteries always be used

for longer battery life and maximum operational performance.

Before using the transmitter， install the (2) AAA transmitter

batteries into the battery compartment. (Use caution that

batteries are installed in the proper direction)

KEY SETINGS

MODE

Changes unit to ON / Thermo / OFF

mode position.

UP / DOWN

Changes temperature, time(r) and other

functions’ value.

Changes each function by the key and

uses UP/DOWN key to change that’s value.

SET

Sets temperature, time(r) and other functions.

Summary of content (4 pages)

PAGE 1
AF-4000TRHH Operation description Modified by Javy 2008/04/11 This remote control SYSTEM offers the user a battery-operated remote control that operates most millivolt gas valves used in some heater rated gas logs, gas fireplaces and other gas heating appliances. The transmitter operates on (2) 1.5V AAA batteries. It is recommended that ALKALINE batteries always be used for longer battery life and maximum operational performance.
PAGE 2
LCD 1. SUN/MON/TUE/WED/THU/FRI/SAT Indicates the day. 2. P1/P2 Indicates program is enable or not in own period time. 3. TIMER / TIME Appears the time and the countdown timer. 4. ON / THERMO / OFF Indicates current mode 5. ROOM °F OR °C Indicates current room temperature. 6. SET °F OR °C Appears the desired temperature to indicate setting room temperature during the time of setting in the thermo operation. 7. Battery icon Indicates the battery is low or not 8.
PAGE 3
MANUAL FUNCTION Initial Setup Hold SET and UP buttons simultaneously for 5 seconds to enter set-up. Each function scale setting is changed by “UP” or “DOWN” key. Setting of C/F conversion: C/F conversion: Use UP or DOWN key to choose Celsius or Fahrenheit, Press "SET" button to continue to gas type setup. Setting of Swing Scale: Swing Scale: Use UP of DOWN key to change the swing value (1° to 3°F (1° to 2°C), Press "SET" button to continue to clock set up.
PAGE 4
Press the “MODE” key into the OFF mode. The appliance flame and fan will shut off. During this time the screen will show OFF. All the functions, MAIN FLAME/ REAR FLAME / FAN/ TIMER, will be shut down exception of LIGHT/ Aux/ Program functions. THERMOSTAT FUNCTION SETTING DESIRED ROOM TEMPERATURE This remote control system can be thermostatically controlled when the transmitter is in the THERMO mode.