User's Manual

Draft
Manual Mode: Push for manual ON, OFF.
ON: The “man＂( ) ICON will appear
And the FLAME icon will appear too.
OFF: The man ( ) ICON will disappear and
The FLAME icon will disappear too.
.Flame modulation:
The flame can only be modulated when the system is ON. The
flame can be ON from the Manual, Timer, Thermostat and Program modes.
The FLAME icon should be on all the time the flame in the fireplace is ON, whether
It is operated in Manual, Timer, Thermostat or Program modes.
The UP arrow will appear on the LCD when the motor drive is to be moving into
the higher flame picture. Once the activatin of the flame height is stopped, the UP
icon on the LCD will disappear.
The DOWN arrow will appear on the LCD when the motor drive is to be moving into
the Lower flame picture. Once the activation of the flame height is stopped, the
DOWN icon on the LCD will disappear.
Push
(UP) button to operate flame motor drive UP. When this key is
pushed, the UP icon will appear. The UP icon will disappear once the activation of the
flame height is stopped (when the button is released.)
Push
(DOWN) button to operate flame motor drive DOWN. When this
key is pushed, the DOWN icon will appear .The DOWN icon will disappear once the
activation of the flame height is stopped (when the button is released).