User's Manual
FUNCTIONS
To operate the system, press the MODE button on the transmitter to select the operational
MODE desired.
1. ON indicates the system is on, either manually or thermostatically.
2. OFF indicates the entire system is turned off.
3. THERMO indicates the system will automatically cycle ON/OFF, depending on
programmed set temperature.
4. PROGRAM indicates the system will automatically cycle ON and OFF in the
programmed mode depending on the 7 day/4 period program that is in memory.
BUTTON SETTINGS
Flip down the plastic cover on the front of the transmitter to expose the “SET” buttons. The flip
cover protects the SET buttons from being changed accidentally. Close the cover after
completing the following settings/programming.
Flashing numbers on the display indicate the system is awaiting user input, such as using the
UP and DOWN buttons to program a new setting. If no change is made to flashing digits within
15 seconds, the system will complete the procedure last programmed and reset the display to
its normal state.
INITIAL SET-UP PROGRAMMING OF TRANSMITTER
Follow the procedures below, upon FIRST USE of transmitter, setting the following program
options:
1. TEMPERATURE SETTING – 0F (Fahrenheit) or 0C (Celsius)
2. CURRENT DAY OF WEEK – SU, MO, TU, WE, TH, FR, SA
3. CURRENT TIME OF DAY – Hours and minutes
4. FLAME CONTROLLER – HI/LO solenoid
CHANGING THE TEMPERATURE SCALE
1. After pressing the small button in the battery compartment to start the set up process the 0F
symbol will begin flashing on the LCD screen.
2. To change 0F to 0C, press the UP or DOWN button on the front of the transmitter.
3. After setting/confirming the preferred temperature SCALE, press the SET button on the front
of the transmitter.
NOTE: You will need to press the SET button, confirming 0F if you want the temperature
readings to be in 0F.
SETTING THE CURRENT DAY OF THE WEEK
1. Following Step 3 on the previous page, the symbol SU will begin flashing on the LCD
screen.
2. To change to the CURRENT day of the week, press the AHEAD or BACK button on the front
of the transmitter.
3. After setting/confirming the current Day of the week, press the SET button on the front of the
transmitter.
SETTING THE CURRENT HOUR AND MINUTES
1. Following Step 3 above, the HOUR digits will begin flashing in the TIME frame on the LCD
screen.
2. To set the current HOUR, press the UP or DOWN button setting the HOUR for the