Installation and Operating Instructions
Skytech: CON1001TH-1
REV. 2-22-22 Page 2
1. DISPLAY Indicates CURRENT room temperature .
2. °F OR °C Indicates degrees Fahrenheit or Celsius.
3. FLAME Indicates burner/valve in operation.
4. ROOM Indicates remote is in THERMO operation.
5. TEMP Appears during manual operation.
6. SET Appears during time the of setting the desired temperature
in the thermo operation.
ROOM
LCD - Liquid Crystal Display
TEMP
1
2
3
SET
4
5
6
SETTING °F / °C SCALE
The factory setting for temperature is °F. To change this setting to °C,
rst:
• Press the ON key and the OFF key on the transmitter at the same
time this will change from°F to °C. Follow this same procedure to
change from °C back to °F.
TEMP
MANUAL FUNCTION
To operate the system in the manual “MODE” do the following:
ON OPERATION
Press the ON key the appliance ame will come ON. During this time
the LCD screen will show ON, after 3 seconds the LCD screen will
default to display room temperature and the word TEMP will show.
(Flame icon will appear on LCD screen in manual ON mode)
OFF OPERATION
Press the OFF key the appliance ame will shut OFF. During this time
the LCD screen will show OF (OFF), after 3 seconds the LCD screen
will default to display room temperature and the word TEMP will show.
LCD DISPLAY FUNCTIONS
TEMP
TEMP
Screen view
pressing ON button
Screen view after
3 second default
Screen view
pressing OFF button
Screen view after
3 second default
THERMOSTAT FUNCTION
SETTING DESIRED ROOM TEMPERATURE
This remote control system can be thermostatically controlled when
the transmitter is in the THERMO mode (The word ROOM must be
displayed on the screen). To set the THERMO MODE and DESIRED
room temperature,
Press the MODE key until the LCD screen shows the word ROOM,
then the remote is in the thermostatic mode.
TO CHANGE THE SET TEMPERATURE
Press and hold the SET button until the desired set temperature is
reached. (By pressing and holding the set button the LCD screen set
numbers will increase from 45° to 99° then restart over at 45°) Next
release the SET button. The LCD screen will display the set
temperature for 3 seconds and the LCD screen will ash the set
temperature for 3 seconds, then the LCD screen will default to display
the room temperature.
TEMPSET
ROOM
TEMP
ROOM
TEMP
ROOM
TEMP
Thermo SET Thermo MODE
Thermo ON Thermo OFF