Operation Manual

Packing Included:
1. Amplifier :1 pcs
2. Strap: 1 pcs
3. Wireless Handheld Microphone: 1pcs; (Optionlal 1pcs headset mic + 1 pcs clip mic)
4. 9V Battery: 1 pcs
5. User Manual: 1 pcs
SPECS :
A. Operation of the Amplifier:
Firstly, make sure the amplifier is available in the current power voltage.
1. Using AC power supply:
Connecting with AC power, please switch to POWER ON position, and the power indicator turns
green ,it shows the amplifier works normally(If suddenly AC power is cut off, the built –in rechargeable
will supply power automatically);
2. Using DC power supply:
Switch to POWER ON position, and the power indicator turns green, it works normally, it has a low
power warning set, if it ‘s low battery, it will provides a “BEEP” sound to inform the users to charge the
amplifier.
Caution
Please switch to POWER OFF position when you finish using the amplifier,
otherwise, it will influence battery life span .
B. Operation of wireless transmitter:
1. Open the cover ,install the 9V battery with correct polarity.(9V normal battery and 8.4V
rechargeable battery can be used simultaneously),then close the cove.
2. Plug the clip mic or headset mic into the MIC socket.
3. Switch to ON position, indicator turns red(Clip mic), the indicator flash up then black out(Handheld
mic) ,it means can work normally ,please turn off the power after using it.
4. The best way to sett the voice volume of amplifier to 2/3 position and then you can adjust the
volume of the transmitter to meet your needs.
Frequency 201.400MHz