Operation Manual

Automatic / Sound active mode:

Set DIP switch 10 to ON position DIP switch 9 to OFF. Program and sound mode can be selected via DIP

switches 1 to 8

Function Instruction

8 Automatic mode

7 Sound mode

6 All shining

5 Twinkling mode 1

4 Twinkling mode 2

3 Twinkling mode 3

2 Auto speed 2(quick)

1 Auto speed 1(slow)

Slave mode:

Set DIP switch 10 & 9 to ON. The master unit will control now all the slave units. Select on the master

device the program mode Automatic / Sound active mode this device then works as master device and

controls all other slave devices which are to be connected to the master device via a 2 core screened

cable. Connect the out XLR connector with the IN connector of the next device.

DMX mode:

Set DIP switch 10 to OFF position and control the DMX receiving address with dip switches 1-9 and you’re

all set-up to start the DMX receiving mode.

(Note: 1 = On, 0 = Off)

DIP Switches DMX

Address

9 8 7 6 5 4 3 2 1

01 0 0 0 0 0 0 0 0 1

02 0 0 0 0 0 0 0 1 0

03 0 0 0 0 0 0 0 1 1

04 0 0 0 0 0 1 1 0 0

… .. .. .. .. .. .. .. .. ..

509 1 1 1 1 1 1 1 0 1