Operation Manual

Appendix I
The indications in DISPLAY and explanations
Indication Explanation
L - -
Data information of CH1-4 corresponding to CH1-4 output
R - -
Data information CH1-4 corresponding to CH4-1 output
NOR
Output 0-100% dimming enabled
CRO
Only FULL ON and STAND BY enabled, dimming disabled
OUT
DMX output
IN
DMX input
FUL
FULL ON
STO
STAND BY
000-0FF
0-100% dimming level
F00-F99
Fade time with range of 0-10 seconds
A01-A99
Speed with the range of 1/60-20 step per second
P01-P16
Program 1-16
E00-E25
Preset minimum dimming level of 0-25%
001-512
DMX adres 1-512
TECHNICAL SPECIFICATIONS
POWER INPUT .....................AC 230V/ 240V ~50Hz, 20A
CHANNEL OUTPUT ........ 5A per channel, total 20A max.
FUSE............................................. F6.3A 250V 5 X 20mm
DIMENSIONS .....................................1308 X 80 X 74mm
OPERATING CONDITIONS
TEMPERSTURE .....................................................0-50ºC
RELATIVE HUMIDITY .............................................≤ 85%
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual. SkyTronic UK cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.