User Manual

2
Remarks：
①The technical data in the above table“★”are different for different
types of products.
②Detailed technical indicators of the product should be consulted and
obtained with the sales staff of the company.
Fiber clamp
Multifunctional clamp is applicable to bare fiber, tail fiber, jumper,
covered fiber and stealth fiber. The clamp meets the requirement of
industry standard FTTH fusion quick splicer.
Heat-shrink sleeve
60mm/40mm/20mm and a series of micro- shrink sleeves (some
features are optional)
Display
★
Provided with TFT color 4.3 LCD display. The screen is protected by
high strength protective panel. Contents (image) can be flipped, easy
for two-way operation.
External Interface
USB2.0 Interface: convenient data download, USB flash disk
upgrade software.
Splicing mode
100 groups user mode, 53 groups factory mode.
Heater mode
40 groups user mode, 11 groups factory mode.
Connection storage
Built-in memory is capable to save latest 10000 splices.
Store 100 groups of splice images (X, Y fiber splicing images).
Electrode life
> 5500 times (times of arc).
Lithium battery
★
Continuous splicing, heating more than 350 times (typical
environment).
Power saving
function
In “Power Save Mode" Under typical
circumstances can save 15% battery power
Power supply
★
Lithium battery provides 12.5V power (charging in 10.8V) and can
be charged continuously when the splicer works. When the charging
time 3.5, the battery charging times are not less than 300 times.
(Charging) Power adapter: Input AC100-240V 50/60HZ, Output
DC13.5V/4.8A. The present power mode can be identified, real-time
monitoring the present battery capacity.
Work environment
Operating environment: -10
～
+50℃; Storage temperature:- 40 ~ +
60℃;Humidity: <95% RH
(non-condensing); Operating altitude: 0 ~5000m
Maximum wind speed: 15m / s.
External
dimension
★
133(Length)*163(Width)*140(Height)
Weight
★
1.6 kg (Batteries not included)