User Manual

<10>Press the button twice to exit calibration after calibration is complete.
17
Figure 10.8.1 Figure 10.8.2
<8>Select【X Window】, and then press the or key to overlap the center of
the gap between the left fiber and the right fiber in X Window with the vertical
auxiliary line(As shown in Figure10.8.2).
Figure 10.7.1 Figure 10.7.2
<7>Select【Y Window】,and then press and hold the or to make the center
line of the fiber in the Y window overlap the horizontal auxiliary line in the Y
window(As shown in Figure10.7.2).
Figure 10.9.1 Figure 10.9.2
<9>Select【Y Window】, and then press the or key to overlap the center of
the gap between the left fiber and the right fiber in Y Window with the vertical
auxiliary line(As shown in Figure10.9.2).