User's Manual

10
NC2600
09
NC2600
Useful Notes And Tips
You can only connect your NC2600 charger with one device at a time.
Touch slot number button(1-4) to change operation mode and current.
Operation with Your iPhone
When the program for a slot is completed, DONE will displayed. With the
exceptionofDISCHARGE mode,top offchargeandtrickle charge(continuous)
willbeapplied.ForCHARGEmode,thetotalchargedcapacitywillbedisplayed.
ForREFRESH&ANALYZE,BREAK-IN,DISCHARGEmode,the totaldischarge
capacitywillbedisplayed.
DisCharge Rate
mAh
DISCHARGE
REFRESHIST.
BREAK-INO.
REST CYCLE
Capacity
Volt Time
OPERATION WITH iPHONE
NC2600 comes with Bluetooth 4.0. When the Bluetooth in device is ON, it will connect to the charger
automatically when the APP starts.
Connect the power adapter DC connector to the charger and then plug the power adapter into
outlet (100-240V AC, 50/60Hz).
Insert AA or AAA battery
Inserting AA or AAA Batteries
1.
2.
When a new battery is inserted and detected, the
battery sign and “CHARGE” in correspond slot will
blinking. Please wait five seconds, the charger will
proceed to the default mode which is charging.
3.
Select the Bluetooth menu from your iPhone or iPad
and ensure the Bluetooth is turned on.
4.
5.
The Bluetooth indicator, located on the right side of charger remains steadily on. The charger name
display in Bluetooth list is “BLE Charger”.
OPERATION WITH iPHONE OPERATION WITH iPHONE
Factory default
setting
Touch systemsetting icon to change value of temperature protection, voltage protection,
discharge cut-off voltage and negative delta V.
Start your NC2600 APP, that you have downloaded
from the APP Store. Your charger will connect to your
device automatically.