INSTRUCTION MANUAL AA/AAA NiMH BATTERY Multi Functions Charger & Analyzer Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com RoHS 2016 SkyRC Technology Co., Ltd. All Rights Reserved. Version 1.
INDEX INTRODUCTION & GENERAL PRECAUTIONS Introduction 02 General Precautions 02 Features 03 Specification 03 INTRODUCTION Thank you for purchasing the SKYRC NC2600 Charger-Analyzer which enables quick and optimum charging of “AA” and “AAA” rechargeable batteries. With charging ,discharging, refresh & analyze, break-in and cycle functions as well as individual LCD displays for charging status; this charging unit is reliable, user-friendly and ideal for use in the home, office or on a trip.
FEATURES & SPECIFICATION GENERAL BATTERY KNOWLEDGE FEATURES INFORMATION DISPLAY ON CHARGER & SMART PHONE Four independent slots There are four independent charger-analyzers for AA and AAA NiMH/NiCd batteries. Larger LCD display with backlit for easy reading. Digitally display various modes during operation.
MODES OF OPERATION OPERATIONS STEPS MODES OF OPERATION OPERATIONS STEPS This section explains various modes and when to use them. To enable each mode, refer to the “Operation” section. 1. Charge: Charge the battery at the selected rate. Suitable for batteries used frequently. 1. Connect the power adapter DC connector to the charger and then plug the power adapter into outlet (100-240V AC, 50/60Hz). 2. Insert AA or AAA battery 2. Discharge: Discharges the batteries at the selected rate. 3.
OPERATIONS STEPS DISPLAY INFORMATION 5. If DISCHARGE mode is selected: The charger will prompt for discharging rate by flashing “DisCharge Rate”. Use UP and DOWN button to choose the desired current. Press ENTER to make the selection. Increase discharge DisCharge Rate rate Capacity VoltTime DisCharge Rate Capacity VoltTime mAh mAh ENTER DISCHARGE REFRESHIST. BREAK-INO. REST CYCLE Decrease discharge rate ENTER DISCHARGE REFRESHIST. BREAK-INO.
OPERATION WITH iPHONE OPERATION WITH iPHONE When the program for a slot is completed, DONE will displayed. With the exception of DISCHARGE mode, top off charge and trickle charge (continuous) will be applied. For CHARGE mode, the total charged capacity will be displayed. For REFRESH & ANALYZE, BREAK-IN, DISCHARGE mode, the total discharge capacity will be displayed.
OPERATION WITH ANDROID PHONE OPERATION WITH ANDROID PHONE Touch “Details” icon to show voltage graphic and battery internal resistance. Touch system setting icon to change value of temperature protection, voltage protection, discharge cut-off voltage and negative delta V. OPERATION WITH ANDROID PHONE Factory default setting NC2600 comes with Bluetooth 4.0. When the Bluetooth in device is ON, it will connect to the charger automatically when the APP starts. 1.
WARRANTY AND SERVICE CHARGING TIME WITH VARIOUS CHARGING CURRENT CONFORMITY DECLARATION SKYRC NC2600 satisfies all relevant and mandatory CE directives and FCC SubPart C Intentional Radiators section 15.247 The product has been tested to meet the following technical standards: Title Result EN 300328 Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques article 3.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
