User's Manual

03 ·
D100 V2
Twin-channel Charger
SKYRC D100 V2 allows you to plug 2 batteries into one charger simultaneously, and it
will intelligently and automatically charge 2 battries at once to their maximum capacity. To
top of it, the batteries being charged do not even need to have the same configuration.
You can connect different chemistry(NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb)batteries into
any of the charging ports.
Dual Input and Power Distribution
Optimized Operating Software
SKYRC D100 V2 features the so-called AUTO function that sets the feeding current
during the process of charging or discharging. Especially for lithium batteries, it can
prevent the overcharging which may lead to an explosion due to the user's fault. It can
disconnect the circuit automatically and alarm once detecting any malfunction. All the
programs of this product were controlled through two way linkage and communication, to
achieve the maximum safety and minimize the trouble. All the settings can be configured
by users!
Special Features
DC Power Output Supported
With the unique feature of power source, the user and driver does not have to take a big
and heavy power supply for race and play outside. The charger is compatible with our
mini partner DC power distributor(Optional part) with 3 output ports and 2 USB ports as
well for powering pit light, corner weight system, mobile phone, and iPad. etc. One
charger for ALL.
The input of SKYRC D100 V2 is AC 100-240V and DC 11-18V. In DC mode, the power of
each channel is 100W. Total power is 200W.
In AC mode, it supports power distribution, for example, if both channel A and channel B
are set to 40W, then, the DC power is 20W. the total power is 100W