User's Manual
Table Of Contents
Congratulations on your choice of SKYRC D100 V2 AC/DC Dual Balance
Charger/Discharger/Power Supply. This unit is simple to use, but the operation
of a sophisticated automatic charger such as SKYRC D100 V2 does require
some knowledge on the part of the user. These operating instructions are
designed to ensure that you quickly become familiar with its functions. It is
therefore important that you read right through the Operating Instructions,
Warning and Safety Notes before you attempt to use your new charger for the
first time. We hope you have many years of pleasure and success with your
new battery charger.
SKYRC D100 V2 is a twin-channel charger with two independent circuits which
can charge batteries of varying chemistries (NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/
Pb) simultaneously. Capable of operating as a power supply with the maximum
output of 100W helps the drivers & hobbyists to power the car measurements
and tools everywhere. With its unprecedented function of voice guide, even a
freshman can operate this charger without any hurdles. Additional feature
including our "Scan to go" function, providing an opportunity of feeling
intellectualized control to operate your charger via personal smart phone app
after connected via Bluetooth 4.0 built-in.
SKYRC D100 V2 is a high-performance, micro processor control charge/
discharge/power supply station with battery management suitable for use with
all current battery types, it is with integral equalizer for six-cell Lithium-Polymer
(LiPo), Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries with max
10A charge current and max 100W charge power. The additional LiHV mode is
able to charge the new generation of LiPo batteries with an end of charge
voltage 4.35V.
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY
NOTES before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is
always a risk of batteries catching fire and exploding.
Introduction
01 ·
D100 V2
Mishandling batteries and battery chargers is extremely dangerous, which
may cause fire and explosion.