User's Manual

Control elements
Main unit
Monitor closed
1515
1414
1212
1111
1010
99
88
77
1616
11
11
22
22
33
33
44
44
55
1313
66
1717
Monitor Notes:
This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
not obstruct the dash, shifter or any other controls.
Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE ▲/ and OPEN
▼
buttons on the front panel only.
The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
obstacle and press OPEN again to resume the monitor open/close sequence.
1. Band
Press BAND to increment from FM1, FM2, FM3, AM10FM1.
2. AS/PS (Auto Store/Preset Scan)
Press AS/PS for 1 second to start station PRESET SCAN function.
Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.
3. Secondary LCD
Additional LCD for system information while monitor is closed
1)LOC
LOCAL indicator, icon will be off when DISTANT (DX) is selected
2)ST
STEREO radio station indicator
3)TIME
Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK, etc
4)LOUD
LOUDNESS selection indicator
4. Disp
Press the DISP button to display CLOCK information on the secondary LCD screen when the monitor is
closed.
5. Open/Close Monitor
Press OPEN to open or close the monitor. The unit will emit 1 confirmation beep upon opening, 3 beeps
when closing. Be careful not to not touch or obstruct the monitor movement during the open/close
sequence, or permanent damage could occur.
Notes:The unit will stop automatically during open/close if an obstacle is detected. If this occurs,
remove the obstacle and press OPEN again to resume the monitor open/close sequence.
Audio can be heard while the monitor is closed.
6. Release
Press RELEASE, pull it off towards you, then the front panel is detached.
7. Rotary Encoder / Enter
Press to access MAIN menu, rotate clockwise/counter clockwise to select desired item and press once to
ENTER.
8. Microphone
Microphone for the Bluetooth hands-free unit
9. IR
Infrared receiver
10. SRC (Mode conversion)
Press once to incrementally select desired source. Press MODE to select between TUNER, DVD, XM,
iPod, CAMERA and AV1 inputs. Modes of operation are indicated in the OSD (On Screen Display) and
secondary LCD.
Note:
iPod must be connected to appear in the MODE selection string.
11. Fast Forward
Fast forward the disc content.
12. Fast Reverse
Fast reverse the disc content.
13. Stop
Stop playback of DVD / CD / MP3 / iPod.
14. Play/Pause
Press once for PAUSE, press again for PLAY.
15. Mute
Press once to MUTE audio, press again to return audio, an icon indicator will flash on the TFT monitor.
16. Power On/Off
Press Volume knob for 1sec to turn the unit on, the unit will beep 2 times. Press and hold POWER for more
than 2secs, unit will beep 3 time, then turn off. NOTE: EJECT will still function even if POWER is off.
Volume
Rotate clockwise/counter clockwise for desired VOLUME level.
17. Eject
Press once for DISC ejection.