User's Manual

You can make the following audio settings:
R
Balance
R
Bass/treble
R
X-bass
R
Sound profile
R
Equaliser
R
Dynamic Noise Covering
i
The settings for balance, bass/treble
and X-bass can be found in the "At a
glance" section (Y page 16).
Selecting a sound profile
X
Call up the "Audio settings" menu.
The entry on the right beside Sound
presets shows the current setting.
X
Select Sound presets.
A list appears. The O icon indicates the
current setting.
X
Select Off or Pop, Classical or Vocal.
The setting is accepted and the list
closes automatically.
Equaliser
X
Call up the "Audio settings" menu.
The entry on the right beside Equal‐
izer shows the current setting.
X
Select Equalizer.
Switch the function on O or off ª.
Dynamic Noise Covering
The equaliser cannot solve all of the acous-
tic problems in the vehicle. When driving,
listening pleasure is significantly affec-
ted by engine, wind and road noise. DNC
(Dynamic Noise Covering) relieves the
driver of the inconvenience of having to
make readjustments. The function ensures
outstanding sound quality, with the volume
and sound characteristics appearing to
remain constant, even during the journey.
The volume is adjusted depending on the
current background noise and the dynamics
are controlled so that even the quietest
sections can be heard clearly.
Before using DNC, calibrate your vehicle
values using the microphone integrated in
the smart high line radio. You can then
select six different volume increase levels
for DNC, 0 (none) to 5 (maximum).
Carry out the calibration process while the
vehicle engine is switched off and switch
on an audio source, e.g. the radio.
X
Call up the "Audio settings" menu
(Y page 81).
X
Press Dynamic noise covering (DNC).
X
To calibrate the microphone: press Cal‐
ibration.
The Silence please ! Calibrating
DNC message then appears.
The DNC calibration successful mes-
sage appears once the calibration proc-
ess is completed.
82
>> smart high line radio.