User's Manual

X
To confirm the entry: press OK.
The Searching... display appears. You
then see a list of stations that can be
received.
X
Press 9 or : to scroll in the list.
X
Tap the desired station.
X
Press & to exit the list.
The selected station is played.
If
no station is found for an entry, G not
found is shown, for example.
Storing stations
Storing channels manually
There are 32 preset positions available
each for the FM and FMT wavebands. You
cannot store stations manually in the FM
dynamic
waveband. Up to 12 stations can be
stored in the MW, LW and SW wavebands.
X
Quick save: in the radio display, press
and hold one of preset positions 1 to 4
until you hear a confirmation tone.
The
currently set station is stored to the
preset position selected.
X
In the preset memory: press 9
or : to scroll in the list.
X
Press and hold a preset position until
you hear a confirmation tone.
The
currently set station is stored to the
preset position selected.
Storing stations automatically (travel
store)
This function automatically assigns sta-
tions that can be received to the preset
memory for the FMT waveband. The entire
waveband
is searched, starting at the low-
est frequency. The 32 stations with the best
reception quality are stored to the preset
positions according to their reception
quality. The station with the best recep-
tion is stored at preset position 1.
X
Press B in the radio display
(Y page 65).
The station preset memory appears.
X
Press the magnifying glass symbol in the
station preset memory.
X
Press Travel store in the "Station
search" menu.
X
The Travel store... message appears.
The smart high line radio searches for
stations
that can be received. The avail-
able stations are automatically stored in
the preset positions.
X
To cancel a function: press 1.
Radio Data System (RDS)
General notes
The Radio Data System (RDS) provides
inaudible additional information in the
FM wavebands (FM, FMT, FM dynamic). The
system
consists of a listening receiver and
a monitoring receiver.
The monitoring receiver constantly scans
the FM waveband and collects data from all
the stations which can be received. The
smart high line radio stores the data and
always keeps the preset memory up to date.
The listening receiver is therefore able to
switch instantaneously to an alternative
frequency with a better signal.
i
RDS only functions for stations which
transmit RDS data.
Switching RDS on/off
X
Press d in the radio display
(Y page 65).
The "Settings" menu appears.
68
>> smart high line radio.