User's Manual

Functions available during a call
Transferring a hands-free call to the
mobile phone
The display shows either the phone number
or the name
The following information is shown in the
display during a call:
R
type of connection (hands-free, mobile
phone)
R
name or phone number of the caller
R
call duration
X
Press the symbol on the bottom right.
You are now conducting the call using the
mobile phone. Call active: Mobile
phone is shown in the display.
X
To return to the call using the hands-
free system: press the symbol again.
Setting the call volume
Option 1
X
Turn cVd the control knob.
Option 2
X
Call up the "Volume settings" menu and
set the volume for telephone calls
(Y page 17).
To end a call
X
Press 1.
The call is ended and the previous dis-
play appears.
Voice dial
If the connected mobile phone supports the
"Voice dial" function, you can select con-
tacts with a voice tag by saying the rele-
vant name. The mobile phone then takes
over the contact selection and making
calls.
X
To switch on voice dial: press Voice in
the telephone menu.
Voice dial is activated. The Please
speak now! prompt appears.
X
To make a call: Say the voice tag for the
contact.
If the voice tag exists and the mobile
phone recognises it, the call is made.
The Calling...<Name> message
appears.
If there is no voice tag or the system does
not recognise it, the Voice dial
failed! message appears.
X
To deactivate voice dial: press 1.
>> smart high line radio.
59
Z