>> smart high line radio. 46 Selection Step Current position X Select the current position. Points of interest X Enter a special destination (Y page 35). X X Enter a name for the new favourite. Proceed as described under "Character entry" in the "At a glance" section (Y page 13). X Press OK to save the destination to the favourites. Option 2: create a new favourite X Press Favourites in the "Navigation" main menu (Y page 25). The "Favourites" list appears.
>> smart high line radio. Map operation and settings Note Company logos displayed on the map are trademarks of the respective companies and used solely for the purpose of indicating the location of these companies. The use of such logos on the map does not indicate approval of, support of or advertising by these companies for the navigation system itself. Setting the map scale X When the map is displayed (Y page 38), press W or X. The section of the map is then zoomed in or zoomed out.
48 >> smart high line radio. Explanation of functions Function Explanation Step Display type Enables different displays during route guidance X Enables different map orientations X Map view X X Press Display type. Select Map only, Turn Icons or Compass. Press Map view. Select Align map northwards, Map in driving direction, Map display dynamic or 3D map. North up: the map is displayed so that north is at the top, the point of the north arrow always points up.
>> smart high line radio. Programme settings Calling up the "Programme settings" menu X Press the d symbol in the "Navigation" main menu (Y page 25). The "Settings" menu appears. X Press Programme settings. The "Programme settings" menu appears.
0 >> smart high line radio. Explanation of functions Function Explanation Step Units Select km-display (metric) or mi-display (imperial) for the map mi = miles X Press Units. The setting switches between metric and imperial. Info Shows the respective map data version for all countries contained in the map X Press Info. Press 9 or : to scroll in the list. The maximum permissible speed is shown when the corresponding map data is available and the Speed limit function is not deactivated.
>> smart high line radio. If you give the command unclearly or give a non-existent or incorrect command, the device responds with "Please repeat your comment". The following languages are available: RGerman REnglish RFrench RItalian X To scroll in the list, press 9 or :. X Switching category display on/off: press on a symbol. Depending on the previous setting, the display is switched on or off.
52 >> smart high line radio. You can start the voice control system in this way from any navigation display. The commands depend on the relevant Navigation menu. All the functions available for manual input are also available with the voice control system. Switching the voice control system off X Say "Cancel". The voice control system is switched off. or X Press a menu option. The voice control system is switched off and the selected function is carried out.
>> smart high line radio. ^ Say the name of the town. ? Berlin _ The system shows a numbered list of town names in the display. ^ Please select an entry number from the list. ? Say the number. ^ Name the street. ? Unter den Linden. _ The system shows a numbered list of street names in the display. ^ Please select an entry number from the list. ? Say the number. ^ Name the house number. ? Say a house number. _ The system shows a numbered list of house numbers in the display.
54 >> smart high line radio. Ryou move from one GSM transmitter / receiver area (GSM cell) into another and no channels are free. Ryou use a SIM card which is not compatible with the available network. Ryou are using a mobile phone with "Twincard" and the mobile phone with the second SIM card is already logged into the network.
>> smart high line radio. Registering and connecting the mobile phone General information You will need to register your mobile phone before using it with the smart high line radio for the first time. The mobile phone is then entered in the smart high line radio's Bluetooth® phone list. This process includes: search by the Bluetooth® mobile phone Rsubsequent registration. If you want to reconnect a phone that has already been registered, it is connected automatically.
>> smart high line radio. 56 The mobile phone is registered on the smart high line radio. i If you connect a mobile phone with the Bluetooth® audio function, the Stream‐ ing connected message also appears. LED display for Bluetooth® connection The LED shows whether a Bluetooth® device is connected or not (Y page 6).
>> smart high line radio. The mobile phone is connected and supported Bluetooth® features are displayed (example 2) : Disconnects the mobile phone ; Determines a master device = De-registering a mobile phone i The supported Bluetooth® features are displayed after a Bluetooth® audio device is connected. Automatic reconnection The smart high line radio searches for a master device automatically when it is switched off.
>> smart high line radio. 58 Telephone operation Incoming call Rejecting or accepting a call When a call is being received, the Incom‐ ing call... message is shown. Either the phone number, the name or Unknown is shown in the display (phone number is not sent). X Press Number. An input menu appears. X Type in the phone number. Press and hold 0 to enter "+". The phone number is shown at the top left. X To reject: press1. To accept: press OK. Once you have accepted the call, you can use hands-free mode.
>> smart high line radio. Functions available during a call Voice dial Transferring a hands-free call to the mobile phone The display shows either the phone number or the name The following information is shown in the display during a call: If the connected mobile phone supports the "Voice dial" function, you can select contacts with a voice tag by saying the relevant name. The mobile phone then takes over the contact selection and making calls.
>> smart high line radio. 60 Using the phone book Introduction The smart high line radio shows the mobile phone's phone book (Contacts I) and the smart high line radio's phone book (Contacts II). The contacts in the phone book in the mobile phone are automatically downloaded when the mobile phone is registered (Y page 55). They are updated after every call and after the mobile phone is connected again. You can also download the contacts from the mobile phone yourself (Y page 64).
>> smart high line radio. smart high line radio phone book (Contacts II) Opening the phone book X Press a phone number and then press ;. The Calling... message appears. Storing a contact in the smart high line radio's phone book (Contacts II) X Press the memory card symbol when the available phone numbers are displayed. An input menu appears. X Press Contacts II in the phone book. The radio phone book appears. Calling and editing a contact X Press a contact in the phone book.
>> smart high line radio. 62 X To call the contact: press :. The Calling... message appears. X To edit the contact: press ;. The input menu for the name appears. X Press OK. The Deleted message appears. Using call lists Introduction The smart high line radio stores calls received, dialled or missed while the telephone is in operation in separate lists. Opening call lists X Change the contact name.
>> smart high line radio. Storing contacts in the phone book for the smart high line radio X Select an entry in the call list and then press the memory card symbol. or X Press the memory card symbol in the contact details display. Calling a contact Option 1 X Press ; briefly to select the highlighted entry. The Calling... message appears. Option 2 X Select an entry. The contact details (name, phone number, date, time) are shown. X Change the name if desired.
>> smart high line radio. 64 X Press Options in the telephone menu. The "Bluetooth® settings" menu appears. X Select the numbers one by one by pressing briefly. The numbers are entered at the top right. X To delete: briefly press1 to delete the last number. Press and hold 1 to delete the entry. X Press OK to confirm the entry. The input menu is closed and the "Bluetooth® settings" menu appears.
>> smart high line radio. X Enter a name. There is a description of how to enter characters in the "Entering characters in the phone book" section (Y page 13). The name is shown at the top left. X To delete: briefly press1 to delete the last letter. Press and hold 1 to delete the entry. X Press OK to confirm the entry. The input menu is closed and the "Bluetooth® settings" menu appears. Audio Radio mode Introduction i Portable electronic devices in the vehicle may seriously impair radio reception.
>> smart high line radio. 66 The frequencies that can be selected are FM, FMT, FM dynamic, MW, LW and SW. FMT: the waveband contains 32 stations sorted by their reception quality, stored automatically by the travel store function . The station with the best reception quality is stored as preset position 1. When you next use this function, the current preset stations are overwritten. Selecting a station using the waveband scan X Press symbol B in the radio display (Y page 65).
>> smart high line radio. X Press OK and confirm the frequency entered. If the smart radio finds the respective station, the display shows Playing 98.3 MHz, for example. The radio display then appears. i You can only enter currently permitted numbers. If you enter a frequency which is outside the frequency range, the smart high line radio tunes in to the next lower frequency. Station presets An arrow and a note indicate under which preset the currently selected station is stored.
>> smart high line radio. 68 X To confirm the entry: press OK. The Searching... display appears. You then see a list of stations that can be received. X Press 9 or : to scroll in the list. Tap the desired station. X Press & to exit the list. The selected station is played. If no station is found for an entry, G not found is shown, for example. X Storing stations Storing channels manually There are 32 preset positions available each for the FM and FMT wavebands.
>> smart high line radio. X Press RDS in the menu. Depending on the previous status, the function is switched on O or off ª. X Press & and return to the radio display. Switching regional mode on/off Some RDS programmes broadcast regional programmes with local content. Switching on regional mode prevents the station from switching to an alternative frequency. X Press d in the radio display (Y page 65). The "Settings" menu appears. X Press Regional in the menu.
>> smart high line radio. 70 RLeisure RJazz Music Music RNational Music ROldies Music RFolk Music RDocumentary RCountry Traffic Programme Note Many FM stations transmit traffic announcements (TA). Switching traffic announcements on/off X Press d in the radio display (Y page 65). The "Settings" menu appears. X Press Traffic announcement. Depending on the previous status, the function is switched on O or off ª. After traffic announcements are switched on, the smart high line radio selects an RDS station.
>> smart high line radio. Radio text Notes This function is available in FM radio mode. Radio text is additional information that is shown in the radio display, e.g. information about the current programme. The radio text is switched off in the standard setting. Switching radio text on/off X Press d in the radio display (Y page 65). The "Settings" menu appears. X Press Radio text in the menu. Depending on the previous status, the function is switched on O or off ª. X Press & and return to the radio display.
72 >> smart high line radio. There is a risk of being distracted from the road and traffic conditions if this is done while the vehicle is in motion. General notes A maximum of 20,000 tracks or music files are played. If a data medium is divided into several partitions, only the first partition found is played. Inserting and removing a CD/DVD Notes If the CD/DVD has a printed side, this must face upwards when the CD/DVD is inserted. If neither side is printed, the side to be played should face downwards.
>> smart high line radio. obstruct the opening/closing of the front panel or do not fit in the slot. i Not all SD/MMC memory cards are designed for the temperatures which may be reached in the vehicle. Due to the wide range of SD/MMC memory cards available on the market, playback cannot be guaranteed for all brands of SD/MMC memory card. A maximum of 20,000 tracks or music files are played. If the SD/MMC memory card is divided into several partitions, only the first partition found is played.
74 >> smart high line radio. Connecting an audio device to AUX X Connect the audio device using a 3.5 mm stereo jack plug with AUX port ;. X Please see the respective operating instructions for how to operate the external audio source. You can connect an external audio source (AUX) to the smart high line radio.
>> smart high line radio. AVRCP (Audio Video Remote Control Profile): Bluetooth® audio profile for audio data control X Bluetooth® visibility On certain Bluetooth® audio devices, as well as activating the Bluetooth® function, the device itself must also be made "visible" for other devices (see the Bluetooth® audio device's operating instructions). X Bluetooth® device name Every Bluetooth® device has its own Bluetooth® device name.
>> smart high line radio. 76 X Press on a data medium symbol. The data medium is read. Playback then starts. Pause function X Press Ë in the relevant basic display. Playback is interrupted. Ì is shown instead of Ë. X To continue playback: press Ì. Playback continues from the point where it was interrupted.
>> smart high line radio. X Press 9 or : to scroll in the track list. X Select a title. The track is played. X To return to the basic display: press the symbol at the bottom left. Fast forward/rewind There are two options for this function. The second option can be used when playing a CD/DVD, an SD/MMC memory card or a USB device. Option 1 X Press and hold û or ü until the desired position has been reached. i On an iPod®, fast rewind only functions within the current track.
>> smart high line radio. 78 ing characters in the phone book" chapter (Y page 13). The search entry is entered in the upper line. X Press OK and confirm the entry. A list shows the entries found. X : Alphabetical track search ; Search by playback criteria = Selects the next highest folder level X Press folder symbol =. The folder structure appears. Folder structure (highest level) X When the highest folder level is shown, press on the folder symbol at the bottom right again.
>> smart high line radio. Playback options Available playback options i This function is not available for Bluetooth® audio devices. Playback options Discs Playback Mix RAudio CD, audio DVD CD, MP3 DVD RiPod® RUSB device RSD/MMC memory card You hear the tracks in random order. Depending on the data medium, the tracks in the folder, the tracks that match the current criteria or all the tracks on the entire medium are played.
80 >> smart high line radio.
>> smart high line radio. Notes for SD/MMC memory cards and USB devices Observe the following notes for fast access to your music data or playback within a category: of this type do not conform to the currently applicable standards. ! Do not affix stickers or labels to the discs. They could peel off and damage the drive. The drive is designed to hold discs which comply with the EN60908 standard. Therefore, you can only use discs with a maximum thickness of 1.3 mm. If you insert thicker discs, e.g.
>> smart high line radio. 82 Dynamic Noise Covering You can make the following audio settings: RBalance RBass/treble RX-bass RSound profile REqualiser RDynamic Noise Covering i The settings for balance, bass/treble and X-bass can be found in the "At a glance" section (Y page 16). Selecting a sound profile X Call up the "Audio settings" menu. The entry on the right beside Sound presets shows the current setting. X Select Sound presets. A list appears. The O icon indicates the current setting.
>> smart high line radio. You will generally find the relevant details either on the DVD itself or on the DVD case. i The smart high line radio is set to region code 2 at the factory. i If you insert a video DVD with a different region code, you will see a message to this effect. X To select a volume increase: press Level. A settings menu appears. X Press = or Ì to select a level from 0 (none) to 5 (maximum). X Press O and confirm the selection. The settings menu closes.
>> smart high line radio. 84 all other data mediums, press ; in the basic display. Option 2: select a data medium in the video main menu A data medium is inserted or connected to the smart high line radio. X Press Video in the main menu (Y page 8). The video main menu appears. Starting playback X The DVD menu is displayed: press OK. Playback starts. If the Automatic full screen setting is activated (Y page 88), playback is in full screen mode.
>> smart high line radio. Showing the navigation menu X Press the video image in the full screen mode.
>> smart high line radio. 86 It may also be possible to select the scene/ chapter from within the menu stored on the DVD. X To skip forwards or backwards: show the navigation menu (Y page 85). X Briefly press û or ü in the navigation menu. Selecting video files This function cannot be selected when playing a video DVD/video CD. Option 1 X To play the next/previous video file: show the navigation menu (Y page 85). X Briefly press û or ü in the navigation menu.
>> smart high line radio.
>> smart high line radio. 88 X Enter the chapter number in the input menu. X Press OK. The corresponding chapter is played. X To enter a playback time: press Search in the "Settings" menu. X Press Time in the menu. X Enter the playback time in the input menu, e.g. 01:05 for 1 hour and 5 minutes. X Press OK. Playback is continued from the corresponding position. Selecting mix This function can be used for data mediums with video files (video DVD/video CD), USB devices and SD/MMC memory cards.
>> smart high line radio. Notes on video mode Data mediums and video formats Discs Video formats supported Video DVD, CD avi, divx, mpg, mpeg, video, super CD mp2, xvid video with video files USB devices (sticks, hard discs) SD/MMC memory card 3gp, 3g2, asf, avi, divx, m4v, mp4, mpeg, mpg, wma, wmv, xvid, H.264 Video format Explanation xvid Video file with MPEG-4 codec H.264 Standard for video compression Notes about discs There may be playback problems when playing copied discs.
>> smart high line radio. 90 Discs Supported picture formats Video DVD, CD jpeg, jpg video and super CD video with video files USB devices jpeg, jpg, bmp, tif, (sticks, hard discs) gif, png SD/MMC memory card Picture format Explanation jpeg, jpg JPEG image file bmp Bitmap image file tif Tagged Image File gif Graphical Interchange Format file png Portable Network Graphic X Select the desired storage medium.
>> smart high line radio. Picture lists Displaying pictures X You can view the pictures individually or as a slide show. X To display the next or previous picture: press û or ü in the picture viewer (Y page 90). X To start a slide show: press Ì in the picture viewer. X To close the slide show: press the display. Press B in the picture viewer (Y page 90). The list of pictures appears.
92
Publication details Internet Further information about smart vehicles and about Daimler AG can be found on the following websites: www.smart.com www.daimler.com Editorial office You are welcome to forward any queries or suggestions you may have regarding this manual to the technical documentation team at the following address: Daimler AG, HPC: R822, D-70546 Stuttgart, Germany Not to be reprinted, translated or otherwise reproduced, in whole or in part, without the written permission of Daimler AG.
www.smart.com smart - A Daimler brand 4515848382 É45158483825ËÍ Order no. 6522 6814 02 Part no.
