User's Manual

VM9424BT

NOTE: The EQ SETTING mode will automatically change to “USER”

when individual audio functions are adjusted.

The Audio menu will automatically exit after a few seconds of inactivity. To exit

quickly, touch the top left corner of the screen or press the VOL rotary encoder

(5).

System Reset

To correct a system halt or other illegal operation, use the

tip of a pen to press the reset button (1), located left of the

disc slot. After a system reset, the unit restores all factory

default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD resumes play

once the reset is complete.

Steering Wheel Control (SWC)

The VM9424BT is compatible with the PAC (Pacific Accessory Corporation)

steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled

“SWC Interface”) on the back of the head unit allows connectivity to the PAC

adapter. Please refer to the instructions included with the PAC adapter for

detailed installation information.

SWC Functions

The following controls are available for most vehicles:

1. Vol Down

2. Vol Up

3. Mute

4. Seek Down / Previous Track / ** Preset Down

5. Seek Up / Next Track / ** Preset Up

6. SRC (Source)

7. ** Select

8. ** Select

9. Band

** If additional steering wheel control buttons are available on the vehicle,

function 7 / 8 may be assigned the "Select" feature. This feature / function may

not be available on some vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is pressed momentarily,

Preset Up will be selected. If "Select" (function 7 or 8) is held down and

function 5 is pressed momentarily, Preset Down will be selected.

[RESET] Butto