User's Manual

8
VM9424BT
USING THE TFT MONITOR
Standby Mode
Touch the STANDBY button on the Source Menu and then screen becomes
black. Touch the screen to resume normal video display.
To access the Source menu, touch the top left corner of the screen or press
the SRC button on the front panel (10) or remote control (8).
Picture Adjustment
To adjust monitor display settings, perform the following steps:
1. Press the PIC button (24) on the remote control to view the “Picture
Menu”.
2. Rotate the VOL button (5) on the front panel to adjust the brightness level
from 0 (least bright) to 20 (most bright).
3. Wait 5 seconds, or press the PIC button (24) on the remote control to exit
the picture menu.
Parking Brake Inhibit
When the pink "PARKING" wire is connected to the vehicle Parking Brake
circuit, the front TFT monitor will display video when the Parking Brake is
engaged. (When the pink wire is grounded via the Parking Brake circuit, video
will be displayed.)
Radio ST DX 2:04AM
NAVI
BLUETOOTH
RADIO
AV2
CD/DVD USB
AV1 SETUP
SD
XM
CAMERA
REAR
N
S
E
W
BACK 3:02AM STANDBY