User's Manual

NX501/NZ501
41
English
English
Owner’s Manual
2. Touch the currently connected device, then press
[ =KEYTODISCONNECTTHEACTIVEDEVICE
3. Touch the desired Device key you wish to use.
Press [
=KEYTOSELECT ITASYOURACTIVEDEVICE
The corresponding cellular phone is set as the current
telephone.
s)FTHEPOWER OFTHECELLULARPHONEIS NOTTURNEDON
turn it on.
s4HECELLULARPHONE MAYPROMPTTO ACKNOWLEDGETHE
"LUETOOTHCONNECTIONORTO ENTERTHE0ASS+EYCODE
of this unit. Perform these operations according to the
message displayed.
4. Touch the [
=KEYTORETURN TOTHEPREVIOUS
screen.
Obtaining the Phone Book data
Sending the Phone Book data from the cellular phone
enables you to make a call using the Phone Book
function from this unit.
1. Perform the Object Push transfer operation of the
Phone Book data on the current cellular phone.
For details of the operation, see the operation manual
of the cellular phone.
.OTE
s3OMECELLULARPHONESMAYNOTBEABLETOTRANSFERTHE
Phone Book data.
s3OMECELLULARPHONES CANNOTTRANSFERTHE0HONE
Book data when the hands-free mode is set or it is
also registered in the Bluetooth mode. In those cases,
disable these functions from the cellular phone before
performing the Object Push transfer.
s3OMECELLULARPHONESMAYTRANSFER0HONE"OOKDATA
automatically.
Telephone operations
Making a call using the Ten-Key pad
1. Touch the [ =KEYTODISPLAYTHE 4EN+EYPAD
screen.
%NTERTHETELEPHONE NUMBERBYUSINGTHE4EN+EY
pad displayed on the screen.
3. Touch the [ =3END KEYTOCALLTHEENTERED
number.
s4HEFOLLOWING4ELEPHONE)NTERRUPTSCREENISDISPLAYED
during phone call.
s4OUCHTHE; =KEYTOTALKBYUSINGTHECELLULARPHONE
and canceling the hands-free function (Private Mode).
To return to the hands-free mode, touch the [
=KEY
again.
s4OUCH THE;
=KEYTOMUTETHE MICROPHONE.OWYOU
can hear the other side, but the other side cannot hear
your side.
s4OUCHTHE; =KEYTOHOLDTHECURRENTPHONECALLNOW
you can answer to the other incoming call. Touch again
to talk with previous call
4. When the call is finished, touch [
=KEYTOHANG
up.
.OTE
s$EPENDINGONSOME SPECIALCELLULARPHONETHE
Telephone Interrupt screen may be closed and the
connection with this system may be disconnected
when entering the Private mode.
Making a call using the Phone Book
You can use the Phone Book data obtained from the
cellular phone to make a call from this unit.
.OTE
s"EFOREUSINGTHISFUNCTIONTHE 0HONE"OOKDATA
must be sent from the cellular phone.
s/NLYTHE0HONE "OOKITEMSWITHATLEAST ONE
telephone number registered in the captured Phone
Book data are displayed on the Phone Book screen.
1. Touch the [
=KEYTODISPLAYTHE 0HONE"OOK
screen.
2. Touch the desired Name key you wish to dial.
s&LICKTHELISTUPANDDOWNTOSCROLLTHELIST
3. Touch the [
=KEYTOCALLTHE SPECIFIEDNUMBER
The Telephone Interrupt screen is displayed, and
calling starts.
s7HENTHECALLIS FINISHEDTOUCHTHE;
=KEYTO
hang up.
Making a call using the History
The system will memorize the Dialed/Received calls
1;B1=࣫㕢⠜䇈ᯢкLQGG 