User's Manual

56
You can confirm various information concerning about the Bluetooth Interface
features.
1. Touch the [
] button to display the information on the screen.
2. Perform setting for the desired item. See the following sections for detail.
3. When you finish confirming the Bluetooth information, touch the [ ] button to
return to the previous screen.
If you want to change the Pass Key setting of this unit, perform the following steps.
1. Touch the text box of the Pass Key item to display the Ten-Key Pad screen.
• The factory default setting is “1234”.
2. Enter your desired 4-digit PIN number, and then touch the [ ] button.
• Setting Automatic Connection
The system automatically reconnects the cellular phone after the connection is lost or
the system is restarted.
• The factory default setting is “OFF”. Touch the [ ] or [ ] button of
the Automatic Connection item to set the function ON or OFF.
• Setting Automatic Answer
If a call comes in, answer automatically after 5 seconds.
•The factory default setting is “OFF”. Touch the [ ] or [ ] button of
the Automatic Answer item to set the function ON or OFF.
• Selecting Microphone
You can select the microphone to be used.
• The factory default setting is “Internal”. Touch the [
] or [ ]
button of the Microphone Select item to set the function.
• Setting Microphone Gain
You can adjust the input level of the microphone in 16 levels.
• The factory default setting is “8”.
•Touch the level indicator button of the Microphone Gain item to adjust the input