User's Manual

2. Folder

Touch the folder title on the display list, the file list will display files and folders in

selected folder.

3. Current Folder

• Showing title of current folder.

• The number on the folder symbol is the number of files and folders number in

current folder.

• Touch the title of current folder, play list will show files and folders in upper folder.

Stop Playback

1. Press the [

] button on remote control more than 1second. Playback is stopped.

2. To resume playback, press the [

] button.

Playback resumes from current playing time.

*Other operations about playing MP3/WMA are almost same as CD Player mode.

USB Audio Operations

This system can play audio files (MP3/WMA) stored in an USB memory which is

recognized as "USB Mass Storage Class device". You can use your USB memory as

an audio device by simply copying desired audio files into it.

Note:

• This system will not operate or may operate improperly with some USB memory.

• Files protected with any DRM cannot be played.

Notes on using USB memories

• General notes

• When no support files, the file list display nothing.

• Notes on the MP3/WMA files

• This system can play the MP3/WMA files stored in the USB memory.

• Set the Sampling Frequency to:

For MP3 files:

• MPEG1 Layer3: 32, 44.1, or 48 kHz

• MPEG2 Layer3: 16, 22.05, or 24 kHz

• MPEG2.5 Layer3: 8, 11.025, or 12 kHz

For WMA files: 32, 44.1, or 48 kHz

• Set the Bit Rate to:

For MP3 files:

• MPEG1 Layer3: 32 to 320 kbps (VBR)

• MPEG2 Layer3: 16 to 160 kbps (VBR)

• MPEG2.5 Layer3: 16 to 160 kbps (VBR)