Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Manual de instrucciones y de instalación NX501E NZ501E 2-DIN DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 6.
NX_NZ501E 欧洲版说明书.
English English Contents Owner’s Manual 1. FEATURES··················································································································5 2. PRECAUTIONS···········································································································6 3.
English Telephone operations·································································································41 15. RADIO OPERATIONS·····························································································43 16. RDS Operations ···································································································44 17. DVB-T Operations··································································································47 18.
Built-In Bluetooth® OEM Steering Wheel Remote Ready Compatible with iPod® / iPhone® via USB Owner’s Manual Motorized 7” Touch Panel Control (NZ501E) English Double Din 6.2” Touch Panel Control (NX501E) English 1.
English 2. PRECAUTIONS WARNING Owner’s Manual • For your safety, the driver should not watch any video sources and/or operate the controls while driving. Please note that watching and operating any video sources while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard. • When using the navigation system, follow the precautions listed below.
1.When the inside of the car is very cold and English English the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper playback may not be possible. If Owner’s Manual moisture forms on the disc (DVD/CD), wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2.
English 3. CAUTIONS ON HANDLING Operation Panel For a longer service life, be sure to read the following cautions. Owner’s Manual • The operation panel will operate properly in a temperature range of 0˚ to 60˚ C. • Do not allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry. • Do not disassemble or modify the set in any way. Doing so may result in damage. • Subjecting the operation panel to shocks may result in breakage, deformation or other damage.
• New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. Ball-point pen Roughness Owner’s Manual Storage English Handling English Handling Discs • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
English 4. PANEL CONTROLS NX501E Functions of Buttons Owner’s Manual [ [Microphone] ] [MENU] [NAVI/AV] [PWR/VOL] [IR] [RESET] [microSD] [AUX IN] Note: Be sure to read this chapter while referring to front diagram “PANEL CONTROLS”. the monitor. Press any place of the screen to turn on the monitor again. [PWR/VOL] Knob [RESET] Button • Press this key to power on the system in power off mode. • Press this button to hardware reset the unit.
English English NZ501E Functions of Buttons Owner’s Manual [microSD] [BAND/END PS] [OPEN] [NAVI/AV] [ISR/SEND] ] [ [ / ] [Microphone] [RESET] [AUX IN] [-] [+] [ ] [ ] [ IR ] [ MENU/PWR ] Note: Be sure to read this chapter while referring to front diagram “PANEL CONTROLS”. [ ]Eject • Press to eject disc from unit. [MENU/PWR] Key [Microphone] • Press this key to power on the system in power off mode.
English • Press to search previous or next track or chapter in CD, MP3/WMA, iPod and DVD video modes. • Press and hold to fast forward or fast backward by 2x, 4x, 8x or 16x step in CD, MP3 /WMA and DVD video mode. Owner’s Manual • Press and hold to fast forward or fast backward in iPod music. • Press and hold to enter manual seek status in Tuner mode, then press briefly to seek station by step. [ ] Button • Press to play, pause or scan audio or video. • Press shortly to scan.
English English 5. REMOTE CONTROL Signal transmitter [OPEN] [MUTE] [ / Owner’s Manual Operating rang : 30°in all directions [POWER / SRC] ] [VOLUME] [ 0-9 ] [NAV/ AV] [BAND] [SET] [MENU] [PIC] [SRCH] [BACK] [ENT] [ , , , ] [TA] [RPT] [TITLE] [ROOT] [ ], [ ] [ ], [ [ZOOM] [SUB.T] [AUDIO] [ANGLE] Replacing the batteries 1.Press the retention tab and pull out the battery tray and remove the old battery. 2.
Functions of Remote Control Buttons English You can use the remote control unit to control the NX501E and NZ501E. Note: • The wireless remote control operation may not be optimal in direct sunlight. [ / ] Button [MENU] Button Owner’s Manual • Press this button to play or pause video and audio media. • Press this button to enter the MAIN MENU or return current resource. • Press this button more than 1 second to stop video and audio media. • Press this button to change your monitor brightness.
[ANGLE] Button • Press to switch the different ANGLE while playing DVD. (No all DVD disc supports this function) [OPEN] Button • Press to switch the AUDIO channel of the disc while playing DVD. • Press this button to OPEN or CLOSE the motorized screen. Please ensure there are no obstructions before starting the operation.(NZ501E only) [SUB-T] Button • Press to switch next available subtitle while playing DVD. Owner’s Manual • Press to display Audio menu in iPod mode.
English 6. MAIN MENU OPERATIONS Front Zone Source Owner’s Manual [Tuner]-Press the button to display the Tuner mode. [Navigation] -Press the button to display the Navigation mode. [Disc Audio]-Press the button to display the Disc Audio mode. [Telephone]-Press the button to display the Telephone mode. [Bluetooth Audio]-Press the button to display the Bluetooth Audio mode. [Rear Button]-Press the button to display the rear menu. [USB Audio]-Press the button to display the USB Audio mode.
This unit provides the following functions in addition to the high image quality and sound quality of DVD video. playback. Note: Menu can be called up during DVD video playback to perform menu setting. • The functions described in this section,for example, the recorded language,subtitles, angles, etc. differ depending on the DVD video disc. Menu screens Owner’s Manual DVD Video Features English DVD video is a high-quality digital video source that provides crisp and clear images.
English About playing a DVD-R/RW or DVD+R/RW disc About MP3/WMA playback This player cannot play DVD-R/RW and DVD+R/ RW discs previously recorded in video CD format. This unit can play back CD-R/CD-RW, DVD-R/ RW and DVD+R/RW discs on which MP3/WMA music data have been recorded. However, MP3/WMA files recorded on DVD-R/ RW and DVD+R/RW discs can be played. Owner’s Manual Discs that cannot be played back This DVD video player cannot play back DVD-Audio, DVD-RAM, Photo CDs, etc.
Owner’s Manual Note: If the set up operation is performed in the middle of DVD video play, the disc will restart from the beginning. Input the old password,and touch the [OK] key,or input "4356" to reset password. English Change DVD System Settings English 8. DVD VIDEO PLAYER OPERATIONS Selecting DVD Set Up Menu 1. Press the [Setting] button on the Main Menu to access the Video set up menu. 2. Press [Video] button. The video menu is displayed. Input a new password,and touch the [OK] key.
2. Disc starts playing automatically. 9- System time English 10- Bluetooth status 11- DVD playback info 12- Previous page Button 13- Repeat switching Button Owner’s Manual 14- Audio Channel switching Button Ejecting a disc 1. To eject a disc press eject [ ] button. The play mode then switches to the Tuner mode. If the disc is left in the ejected position for 15 seconds, the disc is automatically reloaded. In this case, the play mode will remain in the Tuner mode.
] button turns the Key Pad to the Touching [ chapter number input mode. • Title ] button The title menu screen appears. *Depending on the disc, the title menu may not be called. 2. Touch the title menu screen. 3. Select the items in the title menu screen by directional buttons. A large segment to divide the data area of the disc. *Depending on the disc, items may not be selected with the directional buttons. • Chapter 4. Touch [ A small segment to divide the data area of the disc. 5. Touch [ 2.
English recorded in two or more angles, you can switch among the angles during playback. 1. Touch [Angle] key on the remote control during playback. Each time you touch the key, you can switch among angles. 1 - Next page Button 2 - Previous Track /Fast Backward Button 3 - Play/Pause Button 4 - Next Track/Fast Forward Button Owner’s Manual • It may take time to switch among angles. 5 - Elapsed playing time /Seek bar • Depending on the disc, up to 9 angles may be recorded.
Some video files will have two or more subtitles have been recorded; you can switch among these subtitles during playback. The repeat set as the factory default is Repeat Folder. ] ] button once for Repeat off, again for 2. Touch[ Repeat Track. 3. Press [ ] button again for Repeat Folder. ] button to select a subtitle during • Each time you touch the key, you can switch among subtitles. • It may take time to switch among subtitles. Depending on the disc, switching may be impossible.
English 9. DVD AUDIO PLAYER OPERATIONS Owner’s Manual Listening to a disc/Ejecting a disc 17 - Artist Information Please refer to Disc Video Player Operations -watching to a disc and Ejecting a disc. 18 - Album Information Showing CD Player mode screen Operate the CD Player menu 1. After disc is loaded, the play mode is automatically engaged. You can select the button items displayed in the CD player menu by directly touching it in list. 2.
2. Touch this button again to turn off the feature. English English Selecting a track on the Track List Screen This function allows you to select tracks from a displayed list. Owner’s Manual 1. Touch the track title on the display list. The selected track will start playing. 2. When the desired track is not displayed, press and flick the track list up or down. 3. Touch the desired track title key. The corresponding track is started playback.
English files, files with DRM, open session discs. actually played. • Logical format (File system) You may be able to set the order in which MP3/WMA files are to be played by assigning file names beginning with play sequence numbers such as “01” to “99”. Owner’s Manual 1. When writing an MP3/WMA file on a disc, please select “ISO9660 level 1 or level 2(without including expansion format)” as the writing software format. Normal playback may not be possible if the disc is recorded on another format. 2.
Playback resumes from start of the folder which playing track is in. • The number on the folder symbol is the number of files and folders number in current folder. Other operations about playing MP3/WMA are almost same as CD Player mode. Stop Playback 1. Press the [ ] button on remote control more than 1 second. Playback is stopped. NX501E/NZ501E NX_NZ501E 欧洲版说明书.indd 27 Owner’s Manual • Touch the title of current folder, play list will show files and folders in upper folder. English 2.
English 10. USB AUDIO OPERATIONS Owner’s Manual This system can play audio files (MP3/WMA) stored in an USB memory which is recognized as “USB Mass Storage Class device”. You can use your USB memory as an audio device by simply copying desired audio files into it. Notes on the Tag titles Note: Select USB Audio mode • This system will not operate or may operate improperly with some USB memory. Connect your USB memory with MP3/WMA files to the USB connector.
9- Playback status info Note: The repeat in all USB files function is not available. 10- Album Art Shuffle Playback 11-Current ID3 info area 1. Touch [ ] button to shuffle the tracks in playing folder during playback. 12- Elapsed playing time indicator/Seek bar 13- Previous Track /Fast Backward Button 14- Direct Button 2. Touch this button again to turn off the feature. Album Art work If current audio file contains album art image in ID3, the picture will be displayed in this area.
English • It will play from next track, and each track will display for 10s. ] button will switch to [Scan • The [Scan button. ] ] button. 3. Touch [Scan Owner’s Manual ] button will switch to [Scan • If the input track number does not exist or searching with a track number is not allowed, the screen image will not change. • Touch [ • It will continue playback from current track. • [Scan button. Playback starts from the track of the input track number. ] ] button will close the numerical keypad.
9 8 English This system can play USB video files (MP4, etc) stored in an USB memory which is recognized as “USB Mass Storage Class device” You can use your USB memory as an audio device by simply copying desired audio files into it. English 11. USB VIDEO OPERATIONS 7 Owner’s Manual Note: • This system will not operate or may operate improperly with some USB memory. • Files protected with any DRM cannot be played.
USB Video Menu Operations English 9 • Pressing [ ] button starts playback from the beginning of the current track; when this button is pressed again within about 5 seconds, playback starts from the beginning of previous track. 8 Stop Playback Owner’s Manual 10 7 1. Press the [ ] button on remote control more than 1 second. Playback is stopped. ] button. 11 2. To resume playback, press the [ 12 Playback resumes from the first valid media file of the folder.
Note: • When iPod/iPhone is already connected • This system will not operate or may operate improperly with unsupported versions. Touch the [iPod Audio] button on the Main Menu screen. The system changes to the iPod mode, and starts playback from the previous position. • For detailed information on the playable iPod/iPhone models, see our home page: www.clarion.com Notes on using Apple iPod/iPhone • Do not connect an iPod/iPhone to this unit with a headphone connected to the iPod/ iPhone.
[ ]: Song Shuffle. English 6.[ Owner’s Manual ]Next Track Button Touch the [ display. 7.ID3 Information Touch the area of the ID3 Information to display the current play list. ] icon can return to ID3 information 18 18.Display video of iPod/iPhone. Follow operation steps to display video of iPod/iPhone in Simple Control Mode. • Connect the iPod to USB connector via CCA-748 cable. • Select iPod Audio mode. 8.
and playback starts. English English ] button starts playback from the • Pressing the [ beginning of the next track. ] button starts playback from the • Pressing the [ beginning of the current track. Note: In Simple Control Mode, the best way is to control the iPod just on iPod. Selecting a list item from a list screen (1). Touch the list screen and flick up or down to scroll the list. (2). Touch a desired list item on the screen to display the corresponding list of tracks. (3).
•iPod Video Settings mode screen. English Press once to start a single track repeat. Press again to activate a repeat all. To turn repeat off, press same button again. Repeat symbols are displayed in the info window in the upper left area of the screen. Owner’s Manual In iPod Video mode screen, there are three repeat icons : [ ]: Repeat All. [ ]: Repeat 1 Track. [ ]: Repeat off. Note: •iPod Video Simple Control Mode Screen The operation keys in iPod video mode are as same as iPod Audio mode.
Note: •This system will not operate or may operate improperly with some Bluetooth audio players. • For detailed information on the playable Bluetooth audio players, see our home page: www.clarion.com Selecting the Bluetooth Audio mode 1. Press [MENU] button on Operational Panel to return to the Main Menu. 2. Touch the [Bluetooth Audio] key to select the Bluetooth Audio mode. The system changes to the Bluetooth mode.
English 3. Touch the desired Device key you wish to use. ] key to select it as your active device. Press [ The corresponding cellular phone is set as current telephone. • If the power of the cellular phone is not turned on, turn it on. Owner’s Manual • The cellular phone may prompt to acknowledge the Bluetooth connection or ask to enter the Pass Key code of this unit. 4. Touch your desired Device and press the[ key to register for the Bluetooth audio player.. ] 5.
English English 14. Bluetooth TELEPHONE OPERATIONS Owner’s Manual When the connection with your Bluetooth cellular phone is established, the following functions are available on this unit: • Listening to your telephone calls on the car speakers. • Answering to an incoming call. • Making a call using the Ten-Key pad screen. • Making a call using the Phone Book data in the selected cellular phone. • Making a call using the History data of the dialed/ received calls.
to set the function ON or OFF. English Selecting Microphone You can select the microphone to be used. Owner’s Manual • The factory default setting is “Internal”. Touch the ] or [ ] key of the Microphone Select [ item to set the function. Setting Microphone Gain You can adjust the input level of the microphone in 16 levels. • The factory default setting is “7”. •Touch the level indicator button of the Microphone Gain item to adjust the input level.
• The following Telephone Interrupt screen is displayed during phone call. Owner’s Manual • If the power of the cellular phone is not turned on, turn it on. • The cellular phone may prompt to acknowledge the Bluetooth connection or to enter the Pass Key code of this unit. Perform these operations according to the message displayed. ] key to return to the previous 4. Touch the [ screen.
English record data in the memory. You can confirm it and use it to make a call from this unit. 1. Touch the [ displayed. ] key. The History List screen is Answering to an incoming call When a call comes in, the following Telephone Interrupt screen appears. • The items are sorted by Dialed, Missed and Received calls. Owner’s Manual • Flick the list up and down to scroll the list. 2. Touch the desired History item key you wish to dial. ] key to call the specified 3. Touch the [ number.
English English 15. RADIO OPERATIONS Recalling a preset station 1. Touch the [Tuner] button on the Main menu display. The tuner mode screen is displayed. Press the [FM1/2/3/AM] button to select the desire band (FM or AM) on the tuner. 2. Press the [FM1/2/3/AM] button or touch the [Band] key on remote control to select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1->FM2->FM3->AM ->FM1... Touch the [ on preset list.
LOC/DX Setting English The DX / LOC setting changes the tuner sensitivity in order to separate closely spaced stations. This feature is useful in areas that have many radio stations in close proximity. ] key to switch to LOCAL tuner 1. Touch the [ sensitivity. 2. Touch the [ sensitivity. ] key to switch to DX tuner Owner’s Manual 16. RDS OPERATIONS This unit has a built in RDS decoder system that supports broadcast stations transmitting RDS data.
Note: • This function is disabled when a national station such as BBC R2 is being received. • The REG function ON/OFF setting is enabled only when the AF function is ON. Switching ON/OFF the REG function 1. Touch the [ ] key. 2. Touch the [ ] or [ turn the function on or off. ] key of the REG item to ●Canceling TA standby mode 1. When “TA” is displayed on the screen, touch the [ ] key. 2. Touch the [ ] key of the TA item. “TA” on the screen goes off, and the TA standby mode is canceled.
English broadcast moving up the frequencies. Emergency broadcast • If no station with the selected PTY broadcast can be received, the unit returns to the previous mode. If an emergency broadcast is received, all the function mode operations are stopped. “Alarm” appears on the screen and the emergency broadcast can be heard. • The 32 types of PTY listed below can be selected.
English English 17. DVB-T OPERATIONS If DTX501E sold separately connect to unit, you can watch TV program and operate DTX501E. Please read the user manual of DTX501E for the operation of DVB-T mode. NOTE: For your safety, the unit has a safety function, which turns off the picture when car is moving, so only the audio can be heard. The picture can be only watched, when the car is stopped and parking brake is applied. Owner’s Manual This function is available when DTX501E is connected.
English 18. AUX 1 / AUX 2 OPERATIONS External peripheral devices, including a game console, camcorder, iPod/iPhone, etc. can be connected to the AUX 1 or AUX 2 connector on the front or back of this unit using the A/V media cables. Owner’s Manual Switching to AUX IN / AV IN mode • Press [AUX 1] or [AUX 2] button on Main Menu to select desired mode (when unit is connected). If the external device connected to AUX 1or AUX 2 input have audio signal, the unit will broadcast audio of external device.
7 8 1 8. [ 2 2.Press the button again to back to front source menu. Multi-Zone Operation Independent sources can be played simultaneously on the unit. For example, a FM/AM console can be playback on the front screen while DVD video is available to rear passengers. But now you can’t select DVD video in front. DVD Video in Rear 1.[ 3 4 5 10 11 12 ]:Repeat switching Button Press once to start Chapter repeat. Press again to activate Title repeat. To turn repeat off, press same button again.
iPod Video Rear Source ID3 Mode AUX 2 in Rear NOTE: English AUX 1 in Rear Owner’s Manual If the source is selected as the front, the source in rear can’t be selected. If the source is selected as the rear, the source in front can’t be selected. to access the front main Press the Front Button menu but the rear source will keep running.
] button on the Main menu screen. English Press [ English 21. SETTING OPERATIONS Version: Display the software version information. The Setting menu screen will be displayed. Video Setup Menu Owner’s Manual General Setup Menu This menu includes: DVD Wide Screen Mode; Brightness. DVD Wide Screen Mode: Set the DVD wide screen mode on or off. Brightness: Set brightness value from 0 to 20. Clock: Set system clock. Audio Setup Menu AM/PM: Set AM or PM when current time mode is 12HR mode.
English High Pass Filter: Choose the high pass filter through/55Hz/85Hz/120Hz. TS Calibrate: The function of it is to select the Touch Screen Calibrate YES or NO. Low Pass Filter: Choose the low pass filter through/62Hz/95Hz/135Hz. Load Factory: The function is to select to load factory default or not. Amp Cancel: Choose the amplifier audio output on or off. Owner’s Manual Magna Bass EX: Choose the loudness on or off. Navigation Setup Menu Set the Anti-Theft code 1.
NX501E/NZ501E NX_NZ501E 欧洲版说明书.indd 53 English Owner’s Manual Long Press Menu button on Operational Panel for 3 seconds, it will show “Monitor off……Touch the screen to return” and then the head unit will turn off the TFT screen. Touch any place of the screen, the TFT screen will turn on again. English 22.
English 23. TROUBLESHOOTING GENERAL Owner’s Manual Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your installation center. The microprocessor has malfunctioned due to noise, etc. Press the reset button with a thin rod. Note: When the Reset button is pressed, turn off the power.
Measure USB device cannot be inserted. The USB device has been inserted with wrong direction. Reversing the connection direction of the USB device, try it again. The USB connector is broken. Replace with a new USB device. The USB device is damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device. USB device is not recognized. Connectors are loose.
TV/VTR (When connecting an optional TV tuner, etc.) English Owner’s Manual Problem Cause Measure The image is not displayed. The parking brake is not engaged. Check that the parking brake is engaged. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0 or lower. Set to an appropriate temperature (25 or so) and check it again.
English English 25. SPECIFICATIONS Bluetooth Frequency Range: 87.5MHz to 108.0MHz Specification: Bluetooth Ver 2.1+EDR Usable Sensitivity: 8 dBµV Profile: HFP1.5(Hands Free Profile) 50dB Quieting Sensitivity: 14 dBµV HSP1.0 (Headset Profile) Alternate Channel Selectivity: 70 dB A2DP (Advanced Audio Distribution Profile) Stereo Separation: 25dB(1kHz) AVRCP1.2,1.3,1.
178mm 195mm 145mm Owner’s Manual 163mm 100mm NX501E dimensions: NZ501E dimensions: NX501E weight: 2.4kg NZ501E weight: 2.4kg 12mm 124mm 52mm 50mm 165mm English 178mm Remote Control dimensions: Remote Control weight: 50g (including battery) 58 NX501E/NZ501E NX_NZ501E 欧洲版说明书.
English English 26. INSTALLATION /WIRE CONNECTION GUIDE Owner’s Manual CONTENTS 1. Before Starting............................................................................................... 59 2. Package Contents.......................................................................................... 59 3. General Cautions........................................................................................... 60 4. Cautions On Installation.........................................................
3. General Cautions English 1. Do not open the case. There are no user- serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center. 2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. Owner’s Manual 4. Cautions on Installation 1.
1. When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. 2. Wire as shown in Section 7. 3. Reassemble and secure the unit in the dashboard and set the face panel and center panel. When installing the main unit in TOYOTA vehicles, Mounting Screw Holes (Side View of the Main Unit) For NISSAN vehicle Owner’s Manual use the parts attached to the vehicle and follow the instructions in Figure 7.
Installing the Main Unit in TOYOTA Vehicle English Install by using parts attached to the vehicle. (Screws marked are attached to the vehicle.) Owner’s Manual Main Unit 8- 8-Hexagonal Hexagonal screws screw (M5 (M5x8) 8) Mounting bracket Mounting bracket Center Panel (* 2 ) (1 pair leftand (1 pair forfor thethe left right sides) rightand sides) *3 Figure 7 Figure *2. Some panel openings are too small for the unit depending on the vehicle type and model.
English English 6. Cautions on Wiring 1. Be sure to turn the power off before wiring. 2. Be particularly careful where you route the wires. Owner’s Manual Keep them well away from the engine, and exhaust pipe, etc. Heat may damage the wires. 3. If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE). 4. To replace the fuse, remove the old fuse on the back of the unit and insert the new one.
7. Wire Connections English English Note: • Before installing, be sure to disconnect the negative cable of the car battery. • In the optional devices, the RCA cables and the Connector cables are separately-sold items.
English English NZ501E GPS Antenna Black DVB-T Tuner (DTX501E) Refer to Owner’s Manual DTV Radio Antenna Jack iPod/iPhone page 66 MIC Black Yellow Black External Microphone Connection VISUAL IN Red Red White Purple Red Red Black White Red Gray White VISUAL OUT Black CAMERA Green SWI Gray White Yellow Yellow White Red Video in Audio/L Audio/R Subwoofer 1 Yellow White Red CCA-748 (sold separately) Subwoofer 2 Line Out Rear R Line Out Rear L Line Out Front R Line Out Front
English Owner’s Manual 15A 1 B-1 B-3 B-5 B-7 2 B-2 B-4 B-6 B-8 A-1 A-3 A-5 A-7 A-2 A-4 A-6 A-8 1 Parking brake safety 5 for complete operation !!!!Warning!!!! No. device must be connected 3 4 6 7 Description No.
English English Connecting the parking brake cord Connect the cord to parking brake lamp ground in the meter panel. Note: • When the parking brake cord is not connected, the monitor will not show any video sources. • If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.
English: Español: Declaration of conformity Declaración de conformidad We Clarion declares that this model NX501E/ NZ501E is following the provision of Directive 1999/5/EC with the essential requirements and the other relevant regulations. Clarion declara que este modelo NX501E/ NZ501E cumple con los requisitos esenciales y otras disposiciones aplicables descritos en la Directiva 1999/5/CE.
