User's Manual

( If there are videos on iPod, you can
play them by selecting them on the
screen. They will start to play,
otherwise there will be nothing on the
display.) However, you can return to
listen to your music by pressing the
icon.
1.TouchtoviewRootDisplay.
2.Touchsongstodisplaytracks.
3.Touchtoselectasong.
Playback of video on iPod
ForplaybackofVideooniPod,
presstheicon
USB operation
Accessing USB mode:
Touch the USB icon on the TFT
monitor or press the SRC button on
the Radio panel as your source.
Bluetooth Operation
Before using the Bluetooth, it’s necessary to perform the following steps. For
more operating details, refer to each section below.
1. Select the “Bluetooth” option in the
General setup and select the “On”
option to activate the Bluetooth
feature.
13
fig. 28
fig. 27
fig. 26
fig. 25
fig. 29
fig. 30
fig. 31
2. Pair your mobile phone to this unit
(refer to the “Pairing” operation). It
is necessary to pair your phone to
the unit. Without pairing, Bluetooth
function will not be available.
Bluetooth Indicator
There is a Bluetooth indicator at
the top right portion of the touch
screen.
• When the Bluetooth function is “Off”, there is no Indicator
• When the Bluetooth function is “On” and no phone is connected to the unit, the
indicator is gray
• If a phone has been connected to the unit, the indicator is blue
AccessingBluetoothMode
Touch the button at the top of the
touch screen to access Bluetooth
mode directly. 00
BluetoothUserInterface
DialInterface
1.TouchtoaccessDialInterface
2.TouchtonavigateCallLog(Dialed,Missed,Received).
NOTE: Wait until synchronization is completed.
3.TouchtoaccessContacts.
14
fig. 32
fig. 33
fig. 34
fig. 35 fig. 36
fig. 37 fig. 38
fig. 39 fig. 40