User's Manual

噝 Audio may be played back slightly out of synchronization with video images.
 USB Operations
This system can play audio files (MP3/WMA/AAC) stored in an USB memory
which is recognized as
“USB Mass Storage Class device”. You can use your USB memory as an
audio device by simply
copying desired audio files into it.
Note:
噝 This system will not operate or may operate improperly with some USB memory.
噝 Files protected with any DRM can not be played.
Notes on using USB memories
噝
General notes
• When no data is present, the message “NO FILE” will be displayed.
• The USB memory is used with the equalizer function turned OFF.
噝
Notes on the MP3/WMA/AAC files
• This system can play the MP3/WMA/AAC files stored in the USB memory.
• This system cannot play DivX files stored in the USB memory.
• For AAC files, this system supports only the MPEG4 Audio files encoded
by the iTunes.
• Set the Sampling Frequency to:
For MP3 files:
• MPEG1 Layer3: 32, 44.1, or 48 kHz
• MPEG2 Layer3: 16, 22.05, or 24 kHz
• MPEG2.5 Layer3: 8, 11.025, or 12 kHz