User's Manual

English
VX401/VZ401 45
English
Owner’s Manual
TV/VTR (When connecting an optional TV tuner, etc.)
Problem Cause Measure
The image is not displayed. The parking brake is not
engaged.
Check that the parking brake
is engaged.
The display is dark. The brightness control is too
low.
Adjust the brightness properly.
The operating condition is not
good.
The temperature inside the ve-
hicle may be 0℃ or lower. Set
to an appropriate temperature
(25℃ or so) and check it again.
The headlight of the vehicle
is lit
The display is made dark at
night to prevent the glare
(When the headlight of the
vehicle is lit in the daytime, the
display gets dark).
When the VTR is connected,
the image is disturbed.
Improper NTSC/PAL setting Set the AUTO/PAL/NTSC
properly according to the VTR.
There are red, green, and blue
points in display.
-------------------- This is not a failure, but a phe-
nomenon peculiar to a liquid
crystal panel (The liquid crystal
panel is produced according
to technology with very high
precision. Note that, though
there are effective pixes of
99.99% or more, pixel missing
or normally lit pixels account
for 0.01%).