User Guide

15
15
1. The main screen shown in manual charge will display when the CONTINUE button
is pushed. Enter the charge amount desired then press GO to start the charge.
2. The machine will follow the manual charge operation sequence.
DISPLAY MODE: Press this button to select the type of measurement desired.
Pounds will be displayed in lbs. and oz. (2 lb. 6 oz). Kilograms will be
displayed in hundredths (.85 Kg). Pressures will be displayed in PSI,
Kpa or mBAR.
CHART: Allows the charge amount to be entered in the charge screen from the
refrigerant capacity chart. NOTES: Capacities shown in lbs/oz are
automatically converted to Kg when using metric weight. Some M/Y/M
information may not be included in the chart. Always check the vehicle
information for the correct charge amount.
1. Press the CAPACITY CHART button to access the capacity chart information.
2. Press the button below the window showing MAKE to toggle to YEAR then to
MODEL. Make and model information displays alphabetically, year information is
newest to oldest.
3. Press the ▲ ▼ buttons to scroll through the information for the selection showing in
the first button window.
The line of the model information indicated by the ✴ is the line used for automatic
entry of the charge amount. Press the SELECT button to enter the charge and
display the main charging screen.
Once in the main charging screen is displayed you may adjust the charge amount
manually if desired using the ▲ and ▼ buttons then press the GO button to start the
charge.
EXIT: Returns to the main menu.
Once the charge has been started the screen will display the amount being charged, the low
and high side pressures and the HOLD button.
NOTE: If the pressures displayed for the low and high sides are equal and the CHARGE
COMPLETE message has not been displayed, start the vehicle and AC system to
complete the charge.
CONTINUE
Chevrolet 1993 R12 R134a
✴Beretta, Corsica 44 ✴
Camaro 32
Caprice 50
Cavalier 36
Corvette 36
MAKE
▲
▼
SELECT EXIT