User manual

Installation

By following the instructions step by step, you can proceed easily to install the SFA60 by yourself or with the help

of a professional antenna installer.

Before installing your antenna, please check that all items listed above in the ‘Box Content’ are there. In the event

of any missing parts, please contact your dealer.

Step 1: Selecting the Sat Antenna Installation Site

Select an installation site which guarantees an unobstructed view to the south for reception of Astra or Eutelsat

satellites. Use a compass, for example, to determine a southerly direction. Make sure that there are no

obstructions (e.g. trees, buildings) in the direction of reception (skywards).

Note

Please take reference to the table of the Azimuth angles speciﬁed in the back pages of this manual.

S 180°

N 0°

Satellite position

Azimuth

angle

Compass Azimuth angle

Note

To ensure an accurate compass reading, stay away from large metal objects, speciﬁcally electrical cables and

make multiple readings.

Think about the way you might pass your cable in a discreet way from the SFA60 to your Set top Box. The antenna

should not be too distant from your satellite receiver; a cable longer than 30 meters may decrease the quality of

the signal.

Bad Quality Signal Reception Good Quality Signal Reception

BAD!BAD! GOOD!GOOD!