www.skylinkhome.com Total Protection Alarm System MODEL: SC-10 CUSTOMER SERVICE 101A073-001 AUG, 2005. 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 Tel : (800) 304-1187 Fax : (800) 286-1320 Email : support@skylinkhome.com PAT.
SKYLINK TECHNOLOGIES INC. Your Guide to the Total Protection Alarm System MODEL: SC-10 ADDITIONAL ACCESSORIES Smoke Sensor (SS-433) - Detects sound frequencies of existing smoke, carbon monoxide alarms - Activates Security Control Panel (SC-001) or Emergency Dialer (AD-433S) when the preset sound frequency is detected - 9V alkaline battery included Audio Sensor (AS-433) - Detects alarm sound from existing security system alarm; sends signal to Dial-Alert. - Eliminates need for monitoring service.
ADDITIONAL ACCESSORIES Security Control Panel (SC-001) - Four alarm modes (Day, Night, Away, Chime) - Four zones, each zone controls up to 6 devices - Reliable design with microcontroller - 110dB siren Silent Alarm (SW-433) - Plugs into any AC outlet, then plug light into Silent Alarm unit - Light flashes when sensor(s)/transmitter(s) is (are) activated - Silently alerts occupants including the hearing impaired Vibration Sensor (VS-433) - Activates Emergency Dialer when vibration is detected - attach vibr
PACKAGE CONTENTS ADDITIONAL ACCESSORIES All materials required for installation are included in this package: Additional sensors and transmitters as well as add on accessories are available to work with your security system.
OVERVIEW BATTERY MAINTENANCE DOOR/WINDOW SENSOR BATTERY Each Door/Window Sensor operates on a 12 volt alkaline battery that is inside the transmitter. The sensors come with the batteries already installed. Congratulations. You have just purchased one of the most reliable and upto-date Wireless Security Systems on the market today. Skylink’s innovative rolling code technology provides increased security and trouble free wireless connections.
PLANNING YOUR HOME SECURITY NEEDS BATTERY MAINTENANCE Before you begin to install your Security System, analyze the premises to determine your security needs. If your premises has two entrances, you may want to put a Door/Window Sensor on each door. You may choose your main door and a window that is hidden by some bushes and is not visable from the street. If you are securing a small business, you may choose the front door and the warehouse door as locations for your sensors.
DELETE SENSORS AND TRANSMITTERS INSTALLATION You can not delete one sensor/transmitter from the Audio Alarm at a time. You must clear all the sensors and transmitters that are currnetly communicating with the Audio Alarm, then re-program the ones you want to keep. Installation is done using the screws included. For your convenience, we have also included wall anchors and a template to aid in the installation of the Audio Alarm and the Door/Window Sensors. Delete All Sensors and Transmitters 1.
INSTALLATION PROGRAM SENSORS AND TRANSMITTERS TO THE AUDIO ALARM Screwing the unit to the wall 1. Unscrew the two triangular hanging tabs located at the back of the Audio Alarm. The two Door/Window Sensors have been preprogrammed as well as the keychain transmitter at the factory to communicate with the Audio Alarm. If after testing, there is no communication or you have purchased additional Door/ Window Sensors or Motion Sensors, (option), follow the instructions below: 2.
ACTIVATE AND DEACTIVATE THE SYSTEM Now that the system is installed and the sensors are communicating with the Audio Alarm, it is time to learn how to arm and disarm the Audio Alarm. The only way to arm and disarm the Audio Alarm is via the Keychain Transmitter and Keypad Control (option).
TESTING YOUR SYSTEM LIGHTS AND SOUNDS Before you learn how to use your security system, test to make sure that the Door/Window Sensors and the Keychain Transmitter are communicating with the Audio Alarm. LIGHTS TESTING THE DOOR/WINDOW SENSORS ON light lit Turn on the Audio Alarm, (slide the button on the bottom of the unit to “ON”), allow 30 seconds for the Audio Alarm to warm up. The red “ON” light will appear. (when testing, do not turn the “ARM” light on or the siren will sound.
