Setup Guide HU-318 skylinkhome.
CONTENTS 1. Setup HU-318 1.1 1.2 1.3 1.4 Obtain the IP address of HU-318...............3 Login HU-318 Main Page.......................... 4 HU-318 Network Setting............................ 5 Setup Portforward......................................6 2. Setup App 2.1 2.2 2.3 2.4 2.5 2.6 App Download........................................... 7 App Network Settings................................ 8 Zone Settings.............................................9 Device Settings.................................
1.1 OBTAINING THE IP ADDRESS OF HU-318 SETUP HU-318 1. Connect the ethernet cable to the HU-318 hub and to your router 2. Connect the power adaptor to the outlet and to the HU-318 hub 3. You will see your IP address as well as the port number on the HU-318 > 192.168.x.xx:8081 192.168.002.036:8081 192.168.0.14:8081 Example 1.
1.2 LOGING INTO THE HU-318 MAIN PAGE SETUP HU-318 1. Open the browser on your desktop and input your IP address http://192.168.x.xx:8081 Omit the zeros from your IP address shown on the hub to the following format: example http:192.168.002.036:8081 to http:192.168.2.36:8081 2. Input the default user name admin and default password admin admin admin 3. Click on “Settings” icon 1.2 SETUP HU-318 4.
1.3 HU-318 NETWORK SETTINGS SETUP HU-318 1. Ensure the DDNS Status is OK. If it states Fail, Check your internet access DDNS Status : OK 2. Uncheck the DHCP Client and Click on “Save Config” “Uncheck” 3. Now the HU-318 is rebooting 1.
1.4 SETUP PORTFORWARD SETUP HU-318 If you want to control your devices/appliances outside your wifi-network, you need to set up PORT FORWARDING on your Router! To do this visit http://www.portforward.com and enter the router brand and model found at the back of your router, into the search engine. On the returned page, click on the hyperlink “Default Guide” and follow the step by step guide. 1.
2.1 APP DOWNLOAD SETUP APP 1. On your iphone, go to the App Store, and search “skylink homecontrol” 1. On your smartphone, go to the App Store, and search “skylink home” 2. Install the Skylink App 2. Install the Skylink App 3. Run the App 3. Run the App 2.
2.2 APP NETWORK SETTINGS 1. Tap on “Settings” 2. Tap on “Network Settings” 3. Tap on “1” 4. Enter the following information: 1 2 3 4 5 6 7 5. Tap on “Back” 1. Profile: Home 2. IP Address: xxxxx.my.skyhm.net or 192.168.x.xx (If you didn’t setup DDNS) 3. Port: 8081 4. User name: admin 5. Password: admin 6. Enabled: ON 7. Tap “Save” 2.
2.3 ZONE SETTINGS SETUP APP 1. Tap on “Zone Settings” 2. Tap on one of the “Unused” buttons 3. Enter Your Zone Name: eg. Master Room and Tap on “Rename” 4. Tap on “Back” 1 Zone Name: eg. Master Room, Living Room 2 Tap on “Rename” to Save 2.
2.4 DEVICE SETTINGS 1. Tap on “Device Settings” SETUP APP 2. Tap on your zone 4. Enter Your Device Name and Tap on “Return” 3. Tap on one of the “Unused” buttons 5. Select either ON/OFF or No-Dim/Dim and tap on “Add” Device Name: eg. Bed Light, eg. Table Lamp 6. Tap on the Button you created 7. Put your skylink receiver into programming mode and Tap on “Learn” To set your skylink receiver into programming mode please refer to page 18 of this guide. After Programmed, Tap on “Home” 2.
2.5 SCENE SETTINGS SETUP APP 1. Tap on “Settings” 2. Tap on “Scene Settings” 3. Tap on one of the “Unused” buttons 4. Enter your Scene Name and tap “Rename” 1 Scene Name: eg. Movie, eg. Evening 2 Tap “Rename” to Save 5. Tap on your “Scene Name: eg.Movie” 2.5 SETUP APP 6.
2.5 SCENE SETTINGS SETUP APP 7. Select your zone name Tap “Done” 8. Tap on “Device” 2 Tap “Done” 1 Select Zone 9. Select your Device, and Tap “Done” 10. Tap on “Brightness” 2 Tap “Done” 1 Select Device eg. Wall Lamp 11. Select “% Brightness” Tap “Done” 12. Tap on “Set” Select 100% to turn off dimming function 2 Tap “Done” 1 Select % Brightness 2.
2.5 SCENE SETTINGS SETUP APP 13. Set your Device into programming mode and Tap “Learn” to program 1 Tap on “Learn” 2 To set your skylink receiver into programming mode please refer to page 18 of this guide. After Programmed, Tap on “Home” 14. To add more devices to the same scene, repeat scene settings: steps 5-13 15. Tap on “Scene” 16. Tap icons to control the device, ON/OFF switch ON 2.
2.6 TIMER SETTINGS SETUP APP 1. Tap on “Settings” 2. Tap on “Timer Settings” 3. Tap one of the “Unused” buttons 4. Enter your Timer Name Timer Name: eg. Timer1 eg. NIght 5. Tap on “Return” to Save the name 6. Tap on “Zone”, Select your zone and Tap “Done” to save 1 1. Tap “Zone” 3 2. Select from list 3. Tap “Done” 2 2.
2.6 TIMER SETTINGS SETUP APP 8. Tap Device, Select your Device from the List and Tap “Done” to Save 7. Tap “Device” 1. Select Device: 2 3 2 3 Hour amount: eg.01 3. Tap “Done” to Save 1. Tap Minute 1 2. Tap to Select 11. Slide to activate/deactivate the Days 2.6 SETUP APP 10. Tap Minute, Select your Minute from the List, Tap “Done” to Save 1. Tap Hour 1 2. Tap “Done” to Save 1 9. Tap Hour, Select your Hour from the List and Tap “Done” to Save eg. Wall Lamp 2 2.
2.6 TIMER SETTINGS SETUP APP 13. Tap on “On” or “Off” depending on your desired action 2 14. Tap on the “Add” button to add your timer 1. Select “On” or “Off” 2. Tap “Done” 1 to Save 15. Tap on your Timer name 16. Tap on Activate Icon 17. Timer is now active The above example now has Timer1 Set for: Wall Lamp to turn ON in Demo Zone, Monday-Fridays at 1:00am 2.
OPERATION 1. Tap on the “Zone” button 3. Tap on the Zone you want to control 4.
PUTTING RECEIVER INTO PROGRAMMING MODE Mini Screw-In Dimmer Model: LS-318 On/Off & Dimming Control Model: MD-318 Start with dimmer off. Position the slide switch to the desired operating mode. Power on (by turning on the light switch or the circuit breaker). The LED will flash quickly for Regular On/Off mode, slowly for Flashing Alert mode or will be solid for Countdown Timer mode. LS318 is now in programming mode and will stay that way for 15 seconds.
Wireless Control Everywhere. skylinkhome.
