User’s Manual WC-400 skylinkhome.
cONTENT INTRODUCTION ........................................................................................2 SETTING UP THE IP CAMERA ..................................................................... 2-14 FCC................................................................................................................15 WARRANTY .................................................................................................16 CUSTOMER SERVICE .........................................................
INTRODUCTION Thank you for purchasing the SkylinkhomeTM IP Camera, Model WC-400. Before proceeding, please ensure you have completed setting up of your SkylinkhomeTM Internet Hub. You should be able to operate your SkylinkhomeTM Internet Hub from your Smartphone App or Web Browser on your computer. You would also need to have the Wifi router password ready. SETTING UP IP Camera Follow the steps below to setup the IP Camera to work with the Internet Hub.
Step 1 – Power Up Plug in the power adapter to the IP Camera and the LAN cable from the IP camera to one of the open ports of your Wifi router. Then click “Next”. The green LED on the IP Camera lens should flash. If the LED is off, check the LAN cable and power connection.
Step 2 – Search IP Camera The IP Camera Wizard will look for the IP Camera that is connected to your network and it will be displayed on the screen. Click “Next” when you see the camera. Note: If you have multiple IP Cameras, it is strongly recommended that you setup one IP Camera at a time to avoid confusion.
Step 3 – Confirm Camera IP Setting This step shows you the IP setting of the camera. You do not need to change any settings here if you only have one IP Camera. You can simply click “Next”. You will need to enter the user name and password of the camera. The default user name is “admin”, leave the password field blank. Please ensure you remember the port number, cause it is needed when you setup the camera in the Internet Hub. If you have more than one IP Camera, please change the Port number.
Step 4 – Setup Wifi Network You may now setup the Wifi network name and password so the IP Camera can function wirelessly. Press “Scan” to locate the network. Then enter all the Wifi Router info, such as the SSID network name, type, encryption type and password. Then click “Apply”. A reboot count down screen will appear and then remove the LAN cable. The IP Camera will now reboot and connect to the Wifi network.
After count down, check the LED next to the IP Camera lens. If it flashes, the Wifi connection successful, you may click “Exit”.
Step 5 – View IP Camera and Change Settings You have completed setting up the camera, and you may view the IP Camera with your web browser. Open the web browser and enter the IP address of your Internet Hub, that is the IP address on the back of the Internet Hub, in the format of xxxxx.my.skyhm.net, along with the port number in this specific format: http://xxxxx.my.skyhm.net:81 (assume Port number is 81) You will be asked to enter the user name and password of the camera.
Select the type of device / browser you are using. Click “Sign In”. You now see the image from the camera. You should now change the user name and password of the camera. Click the “Settings” icon.
Click “System Settings”, then “Users Settings”. You will see the screen below and change the user name and password. Click “Set” after setting up the user name and password.
Step 6 – Setup Camera in Internet Hub You may now setup the camera in the Internet Hub. Open the Internet Hub Main Page on your web browser. On the main screen, select “Settings”. On the Settings page, scroll down to the bottom of the page and click “Camera Settings”.
Step 7 – Input Camera Info You may now setup the camera to one of the zones that you have already setup. In this example, we are setting up the camera into the “Master Bedroom” zone. You must setup at least one zone in order to have a camera for that zone. Enter the IP address of your Internet Hub as shown below, with the port number. This is the same info you entered in Step 5. Also enter the user name and password for the camera that you created in Step 5.
Step 8 – View Camera in Internet Hub The camera is now setup and you may see the live image by clicking the Camera button on the Internet Hub main screen. Then select Master Bedroom, you will see the live camera image. You may select up / down / left / right to change the viewing angle. If the image is not displayed, select “Change Mode” and select the type of device / browser your are using.
You can also view the camera image on the zone page. Go into the zone you setup for the camera, and you will see the camera image and all other programmed devices in that zone. You may set up additional cameras by following the same procedures.
FCC FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY If, within one year from date of purchase, this product should become defective (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required. CUSTOMER SERVICE If you would like to - find out the up-to-date specifications - know more about features and applications - download documents, i.e.
Notes ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ...................
NOTES ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ...................
Wireless Control Everywhere. skylinkhome.
