Data Sheet
Table Of Contents
- 1 General Description
- 2 Applications
- 3 Features
- 4 Application Block Diagram
- 5 Module Pinout and Pin Description
- 6 Interfaces
- 7 PCB Footprint and Dimensions
- 8 Electrical Characteristics
- 9. Performance Specification
- 10 Reference Schematics
- 11 Hardware Boot Mode
- 12 Manufacturing Process Recommendations
- 13 Ordering Information
- 14 Packaging Specification
- 15 Revision History
- 16 Contact Information
Model:WG229
4
/
22
WG229 -DA-001,A/1
1 General Description
The Wi-Fi Module is a small form-factor, single stream, 802.11b/g/n WiFi module with on-board low power
application processor. It is a low cost serial WiFi module, support UART-WiFi - Ethernet data transmission.
The has been optimized for client applications in the home, enterprise, smart grid, home automation and control
that have lower data rates and transmit or receive data on an infrequent basis. The Wi-Fi Module also enables
rapid application development of ultra low power devices with the complete application SW on-chip . This
combination makes the Wi-Fi Module an ideal solution for low power automation and sensor solutions because
of its high efficiency and low power consumption.
The Wi-Fi Module can be used to design applications using 802.11b/g/n communication protocols. All features
are enhanced by a built-in antenna, external antenna connector and an interface port to the carrier board. This
interface port includes power supply pins, GPIO ports and UART ports.
Figure 1: WG229 Top View
Skylab M&C Technology Co., Ltd.
WiFi module