User's Manual

SKYLAB M&C Technology Co., Ltd

SKW72- User Manual

SKW72-UM-001,A/2

Pin Description

1 GND GROUND

2 ANT Antenna pin

3 GND GROUND

4 NC NC

5 NC NC

6 NC NC

7 RESET_CONFIG resets the firmware to its default configuration.

(UART_CTS) (GPIO_12)

Active pulling up。

8 LED6 (GPIO_17) WLAN LED

9 LED5 (GPIO_16) LAN_PORT3_LED,be free for customer defined.

10 LED4 (GPIO_15) LAN_PORT2_LED

11 LED3 (GPIO_14) LAN_PORT1_LED

12 LED7(GPIO_27) SYSTEM LED

13 LED1 (GPIO_1) USB LED

14 LED2 (GPIO_13) LAN_PORT0_LED

15 LED0 (GPIO_0) Wireless LED

16 UART_RX (SPI_CS1) Serial data in

17 UART_TX (SPI_CS2) Serial data out

18 GND GROUND

19 GND GROUND

20 WAN_PORT_RX+ WAN port

21 WAN_PORT_RX- WAN port

22 WAN_PORT_TX+ WAN port

23 WAN_PORT_TX- WAN port

24 LAN_PORT3_TX+ Ethernet port3

25 LAN_PORT3_TX- Ethernet port3

26 LAN_PORT3_RX+ Ethernet port3

27 LAN_PORT3_RX- Ethernet port3

28 LAN_PORT2_RX+ Ethernet port2

29 LAN_PORT2_RX- Ethernet port2

30 LAN_PORT2_TX+ Ethernet port2

31 LAN_PORT2_TX- Ethernet port2

32 LAN_PORT1_TX+ Ethernet port1

33 LAN_PORT1_TX- Ethernet port1

34 LAN_PORT1_RX+ Ethernet port1

35 LAN_PORT1_RX- Ethernet port1

36 GND GROUND