Data Sheet
Table Of Contents
- 1.简介Brief Introduction
- 2.特点Features
- 3.应用场景Applications
- 4.应用框图Application Block Diagram
- 5.管脚定义Pinout Description
- 6.接口简介Interfaces Introduction
- 7.模组参数Module Specifications
- 8.参考设计原理图Reference Schematic
- 9.PCB设计参考PCB Design Guide
- 10.包装信息Packaging Specification
- 12. 订购信息Ordering Information
- 13. 联系信息Contact Information
- 空白页面
- 空白页面
- 空白页面
10 / 21 SKB378-DA-001,A/1
深圳市天工测控技术有限公司
Skylab M&C Technology Co., Ltd
SKB378 规格书 datasheet
A few GPIOs also have EM4 wake functionality. These pins are listed in the Alternate Function Table.
Figure 6: SKB378 GPIO alternate function
注：EM 指 Energy Mode 低功耗模式。M2/EM3 操作仅端口 A/B 上的数字外设 I/O 支持。EM0 和 EM1 中
的数字外设操作所有 GPIO 端口都支持
Note: EM stand for Energy Mode. EM2 and EM3 operation is only supported for digital peripheral I/O on
Port A and Port B. All GPIO ports support digital peripheral operation in EM0 and EM1.
下表描述了外设功能于特定功耗模式下的实现, 其余模块支持完整配置。
The table below describes device specific implementation of the features. Remaining modules support
full configuration.