Material Safety Data Sheet Material Safety Data Sheet Client Shenzhen Shengdingyuan Technology Co., Ltd 3F, Block 3, The 2nd Industrial Park Pengfa, Shijing Community, Add. of Client Guanlan Street, Longhua New District, Shenzhen Description Li-Polymer Battery Model /Type SPY 651723 Manufacturer Shenzhen Shengdingyuan Technology Co., Ltd Add. of 3F, Block 3, The 2nd Industrial Park Pengfa, Shijing Community, Manufacturer Guanlan Street, Longhua New District, Shenzhen Nominal Voltage 3.
Material Safety Data Sheet Section 1- Chemical Product and Company Identification 1. Chemical Product Identification Product name: Li-Polymer Battery Model: SPY 651723 2. Company Identification Manufacturer /Supplier Name: Shenzhen Shengdingyuan Technology Co., Ltd Address: 3F, Block 3, The 2nd Industrial Park Pengfa, Shijing Community, Guanlan Street, Longhua New District, Shenzhen Telephone number of the supplier: + 86-13724330450 Emergency Telephone No.
Material Safety Data Sheet Reported as carcinogen Not applicable Section 3 – Composition/Information on Ingredients Li-Polymer Battery is a mixture. Hazardous Ingredients (Chemical Name) Concentration or concentration ranges (%) CAS Number Lithium Cobalt Oxide (LiCoO2) 35.5 12190-79-3 Aluminum Foil (Al) 9 7429-90-5 1.1-Difluoroethylene polymer 1 24937-79-9 Graphite (C) 18 7782-42-5 Copper Foil (Cu) 15 7440-50-8 Styrene-Butadiene polymer 1.
Material Safety Data Sheet Ingestion If ingestion of contents of an open battery occurs, never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING. Have victim drink 60 to 240 mL (2-8 oz.) of water. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Have victim rinse mouth with water again. Quickly transport victim to an emergency care facility.
Material Safety Data Sheet immediately. Methods and materials for cleaning up Absorb spilled material with an inert absorbent (dry sand or earth). Scoop contaminated absorbent into an acceptable waste container. Collect all contaminated absorbent and dispose of according to directions in Section 13. Scrub the area with detergent and water; collect all contaminated wash water for proper disposal.
Material Safety Data Sheet vapor. Keep away from heat and open flame. Store in a cool, dry place. Personal Protective Equipment Respiratory Protection: Not necessary under normal conditions. Skin and body Protection: Not necessary under normal conditions, Wear neoprene or nitrile rubber gloves if handling an open or leaking battery. Hand protection: Wear neoprene or natural rubber material gloves if handling an open or leaking battery.
Material Safety Data Sheet Decomposition temperature Not available. Odout threshold Not available. Evaporation rate Not available. Flammability (soil, gas) Not available. Viscosity Not applicable Section 10 - Stability and Reactivity Stability The product is stable under normal conditions. Conditions to Avoid (e.g. static discharge, shock or Incompatible Materials Do not subject Li-Polymer Battery to mechanical shock.
Material Safety Data Sheet Section 13 – Disposal Considerations Product disposal recommendation: Observe local, state and federal laws and regulations. Packaging disposal recommendation: Be aware discarded batteries may cause fire, tape the battery terminals to insulate them. Don’t disassembly the battery. Completely discharge containers (no tear drops, no powder rest, scraped carefully). Containers may be recycled or re-used. Observe local, state and federal laws and regulations.
Material Safety Data Sheet - The US Hazardous Materials Regulation (HMR) pursuant to a final rule issued by RSPA - The Office of Hazardous Materials Safety within the US Department of Transportations’ (DOT) Research and Special Programs Administration (RSPA) Section 15 - Regulatory Information OSHA hazard communication standard (29 CFR 1910.
