Owners manual

Pg 4I-JL3540BP
4. Remove the OEM front skid plate using a 13mm socket / wrench. (See
Photo # 2)
5. Remove the OEM front sway bar end links using a 6mm hex key socket
/ wrench & 18mm socket / wrench. (See Photo # 3)
6. Remove the OEM front track bar using a 21mm socket / wrench. (See
Photo # 4)
7. Disconnect the OEM drag link from the OEM pitman arm using a 21mm
socket / wrench. (See Photo # 5)
8. Remove the OEM front shocks using a 18mm socket / wrench. (See
Photo # 6)
9. Disconnect the OEM front brake line brackets from the OEM front lower
control arms using a 15mm socket / wrench. (See Photo # 7)
10. Mark the location of the OEM front driveshaft / flange at the front
differential & disconnect using a 15mm socket / wrench. (See Photo # 8)
11. Disconnect the wiring harness from the passenger side OEM front upper
control arm using pliers.
Photo # 2
Photo # 3
Photo # 4
Photo # 5
Photo # 6
Photo # 7
Photo # 8